Monthly Archives: August 2016

How to Complete 2013-2014 KIA CERATO in Dash DVD GPS Navigation System Built in WIFI Installation

Posted on by
2013 2014 KIA CERATO Left after installation

For newbie or experienced driver who do not have a clear idea of how to retrofit 2013-2014 KIA CERATO in car DVD system from Seicane. Here I’ll show you the right steps to how to deal with the trouble. Be patient to read these steps one by one and you can get what you want.

2013 2014 KIA CERATO Left after installation

2013 2014 KIA CERATO Left after installation

Precautions for this installation:

1.Make your car power dump to avoid getting electric shock.

2.Please disconnect the power Park your car in the right place before you start any work.

3.Remove your key in case of any danger.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

KIA CERATO in car DVD system installation instruction

1. Pry the side panel with a lever, and then remove it.

Pry the side panel with a lever, and then remove it

Pry the side panel with a lever, and then remove it

2. Remove four screws by the screwdriver.

Remove four screws by the screwdriver

Remove four screws by the screwdriver

3. Remove the trim panel with your hands. If necessary, you may use a lever to loosen it.

3-1. Remove the trim panel with your hands. If necessary, you may use a lever to loosen it

3-1. Remove the trim panel with your hands. If necessary, you may use a lever to loosen it

3-2

3-2

4. Remove four screws around the factory radio with a screwdriver.

Remove four screws around the factory radio with a screwdriver

Remove four screws around the factory radio with a screwdriver

5. Take the factory radio out of the dash.

Take the factory radio out of the dash

Take the factory radio out of the dash

6. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

Unplug the connectors at the back of the factory radio

7. Check all the accessories for the new Seicane car stereo.

8. Connect the harnesses to the back of the new Seicane car stereo.

9. Connect the Seicane car stereo to your original car radio ‘s plugs.

10. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car stereo into the dash.

12. Put everything into their original place. All the installation is done.

We have done an excellent job of install 2013 KIA SORENTO DVD player from Seicane. Some of you may also have trouble with it. It doesn’t matter. For you not sure how to deal with it, you can ask the dealer for help. Now I want to recommend you a new DVD player from Seicane as followed:

http://www.seicane.com/android-aftermarket-radio-navigation-system-for-2013-2014-kia-cerato-left-with-dvd-player-bluetooth-mirror-link-gps-hd-1024-600-touch-screen-obd2-dvr-rearview-camera-1080p-video-tv-usb-sd-3g-wifi-steering-wheel-control-s168051l

During your driving trip the safe and convenient will be put on the first place. Why not choose this specially designed android in dash navigation. Not only the wireless Bluetooth but the high speed 3G&WIFI serves you what you look forward to.

How to easily install a 2006-2012 Toyota Terios car radio with DVD GPS Navigation Radio Bluetooth Mirror link touch screen

Posted on by
2006-2012 Toyota Terios car radio after installation

How to install the new car radio in my car and is it difficult for me to do it? Most of car owners will worry about the installation of new car radio. Actually, you can install the new car radio easily with a detailed installation guide. In here, I’d like to introduce a detailed installation guide for a 2006-2012 Toyota Terios car radio from Seicane to you. Wish you can get some help from it.

2006-2012 Toyota Terios car radio after installation

2006-2012 Toyota Terios car radio after installation

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2006-2012 Toyota Terios car radio installation guide

1. Remove the panel with a lever on the both side and disconnect the wire.

1-1. Remove the panel with a lever and pull it away from dash

1-1. Remove the panel with a lever and pull it away from dash

1-2

1-2

2. Unscrew the four bolts holding the original car radio.

Unscrew the four bolts holding the original car radio

Unscrew the four bolts holding the original car radio

3. Take out the car radio and disconnect the wire harness at the back of the unit.

3-1. Take out the car radio and disconnect the wire harness at the back of the unit

3-1. Take out the car radio and disconnect the wire harness at the back of the unit

3-2

3-2

4. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

5. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

6. Connect the Seicane car radio to your original car radio ‘s plugs.

7. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

8. Put the new Seicane radio into the dash.

9. Put everything into their original place. All the installation is done.

After reading this detailed installation guide for a 2006-2012 Toyota Terios car radio, you can try to install it by yourself. If you have any problems with the installation, you can go to the dealer ask for help. If you don’t have any experience of installation, it suggests you to arrange professionals to install it directly.

Besides, you have to check the new car radio before installation and make sure it can work well in your car. If you don’t have one yet, I have a great 2006-2012 Toyota Terios car radio from Seicane to share with you.

http://www.seicane.com/android-bluetooth-radio-navigation-system-dvd-player-for-2006-2012-toyota-terios-with-mirror-link-touch-screen-obd-dvr-tv-usb-sd-3g-wifi-ipod-rearview-camera-s166957

This wonderful 2006-2012 Toyota Terios car radio has intelligent pure android 5.1.1 operation system. You can connect your phone by Bluetooth function to make hands-free calls and music streaming. You can get to any destination with the 3D Navigation system and never get lost. Wish you like it and enjoy your trips from now!

How to easily upgrade a 2013-2016 Toyota RAV4 head unit with DVD player Bluetooth Mirror link Capacitive multi-touch screen OBD DVR TV

Posted on by
2013-2016 Toyota RAV4 head unit after installation

If you are familiar with the image below, you might have the same dashboard in your car. If you want to upgrade your factory radio, you can read this passage carefully and you can learn how to upgrade the factory radio by yourself. In the next, I’d like to share a step-by-step installation guide for a 2013-2016 Toyota RAV4 head unit from Seicane to you for your reference.

2013-2016 Toyota RAV4 head unit after installation

2013-2016 Toyota RAV4 head unit after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2013-2016 Toyota RAV4 head unit installation guide

1. Begin your installation by removing the negative cable from the battery.

Begin your installation by removing the negative cable from the battery

Begin your installation by removing the negative cable from the battery

2. Remove the upper dashboard trim panel with a lever, set the panel aside once removed.

Remove the upper dashboard trim panel with a lever, set the panel aside once removed

Remove the upper dashboard trim panel with a lever, set the panel aside once removed

3. Pry the air conditioning vents gently which are on the left and right-hand sides of the factory touch screen unit away from the dashboard.

3-1.Pry the air conditioning vents gently which are on the left and right-hand sides of the factory touch screen unit away from the dashboard

3-1.Pry the air conditioning vents gently which are on the left and right-hand sides of the factory touch screen unit away from the dashboard

3-2

3-2

4. Pry the clock display gently and hazard lamp panel away from the trim panel and set it to the side.

Pry the clock display gently and hazard lamp panel away from the trim panel and set it to the side

Pry the clock display gently and hazard lamp panel away from the trim panel and set it to the side

5. Take four retaining screws attaching the factory unit to the dashboard out.

Take four retaining screws attaching the factory unit to the dashboard out

Take four retaining screws attaching the factory unit to the dashboard out

6. Softly remove the factory unit from the panel and lean it forward to gain access to the wiring harnesses on the reverse side.

Softly remove the factory unit from the panel and lean it forward to gain access to the wiring harnesses on the reverse side

Softly remove the factory unit from the panel and lean it forward to gain access to the wiring harnesses on the reverse side

7. Unplug the factory radio by pulling off the individual harnesses.

Unplug the factory radio by pulling off the individual harnesses

Unplug the factory radio by pulling off the individual harnesses

8. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

9. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

10. Connect the Seicane car radio to your original car radio ‘s plugs.

11. Put the new Seicane radio into your dashboard, you should check whether your connections are correct, the new unit is in right position, and you’d better have a tidy for the cables.

12. Check whether the new Seicane radio is working without problem.

13. If there is no problem, firm removed screws and bolts that are put aside, then make trim panel back on your new Seicane radio.

All above is the step-by-step installation guide for a 2013-2016 Toyota RAV4 head unit and wish you can install by yourself with this installation guide. If you still have any problem, you can go to the dealer or professionals ask for help. Besides, the first thing you have to do is check the new head unit whether can work well in your car. If you still looking for one, I have a great 2013-2016 Toyota RAV4 head unit from Seicane to share with you:

http://www.seicane.com/autoradio-android-gps-navigation-system-for-2013-2016-toyota-rav4-with-dvd-player-bluetooth-mirror-link-capacitive-multi-touch-screen-obd-dvr-tv-usb-sd-3g-wifi-rear-view-camera-ipod-s168017

This 2013-2016 Toyota RAV4 head unit from Seicane is an amazing replacement for your factory radio. The performance to process the complicated database and a massive graphics is greatly improved by the upgraded Android 5.1.1 version and a powerful Quad-core CPU. To navigate to wherever you want is no longer a trouble to you with the accurate guidance provided by the GPS system of this unit. The Bluetooth to make hands-free calls and stream music so that you can have a safer driving and keep yourself and your passengers enjoyable all the way. Wish you have a good time with it!

How to easily replace a 2008-2015 MAZDA 6 head unit with Bluetooth Mirror link GPS multi-touch screen DVD Player Radio

Posted on by
2008-2015 MAZDA 6 after installation

Are you tired of asking the way when you driving? Are you bored with the old factory radio? If you can’t stand this situation again, the best way for you is to upgrade your old factory radio. In here, I’d like to share a detailed installation guide for a 2008-2015 MAZDA 6 head unit from Seicane to you. You can refer to it and learn how to install by yourself.

2008-2015 MAZDA 6 after installation

2008-2015 MAZDA 6 after installation

Tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2008-2015 MAZDA 6 head unit installation guide

1. Remove your cup holder.

Remove your cup holder

Remove your cup holder

2. Unscrew and remove the shift knob.

Unscrew and remove the shift knob

Unscrew and remove the shift knob

3. Remove the shift trim panel with your hands.

Remove the shift trim panel with your hands

Remove the shift trim panel with your hands

4. Then remove both sides trim panel of the heat control.

Then remove both sides trim panel of the heat control

Then remove both sides trim panel of the heat control

5. Pull out the panel and set it aside.

Pull out the panel and set it aside

Pull out the panel and set it aside

6. Remove four screws on each side of the heat control with a Phillips-screwdriver.

Remove four screws on each side of the heat control with a Phillips-screwdriver

Remove four screws on each side of the heat control with a Phillips-screwdriver

7. Pull out the heat control slowly.

Pull out the heat control slowly

Pull out the heat control slowly

8. Find two screws under the radio and remove them.

Find two screws under the radio and remove them

Find two screws under the radio and remove them

9. Push the top panel and set it aside.

Push the top panel and set it aside

Push the top panel and set it aside

10. Remove two screws with a Phillips-screwdriver as the picture shows.

Remove two screws with a Phillips-screwdriver as the picture shows

Remove two screws with a Phillips-screwdriver as the picture shows

11. Pull out the factory radio slowly.

Pull out the factory radio slowly

Pull out the factory radio slowly

12. Disconnect the original harness and set the factory radio aside.

Disconnect the original harness and set the factory radio aside

Disconnect the original harness and set the factory radio aside

13. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

14. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

15. Connect the Seicane car radio to your original car radio ‘s plugs.

16. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

17.Put the new Seicane radio into the dash.

18. Put everything into their original place. All the installation is done.

That’s all the detailed installation guide for a 2008-2015 MAZDA 6 head unit. If you have any problems about the installation, you can go to the dealer or professionals ask for help. However, the suitable head unit is important for your car. If you don’t have one, you can refer this link to check the 2008-2015 MAZDA 6 head unit from Seicane.

http://www.seicane.com/android-car-dvd-player-radio-navigation-system-for-2008-2015-mazda-6-with-bluetooth-mirror-link-gps-multi-touch-screen-obd-dvr-rearview-camera-tv-usb-sd-3g-wifi-ipod-s168001

This Car DVD player Radio navigation system is suitable for 2008-2015 MAZDA 6. You can have a faster and smoother operation thanks to its upgraded both software and hardware. A more intuitive interface is available due to the large 8 inch multi-touch screen with HD 1024*600 pixel resolution. The A/V input and USB wired connection provides you with flexible options to entertain yourself and your passengers. Wish you like it!

How to easily replace a 2005-2010 Skoda OCTAVIA III head unit with Radio DVD player GPS navigation Bluetooth TV USB SD 3G WIFI IPOD

Posted on by
2005-2010 Skoda OCTAVIA III after installation

If you are looking for the detailed installation guide for the 2005-2010 Skoda OCTAVIA III head unit, this article must be helpful for you. The following part is focus on the procedure of removal and installation. The picture shown below is the Skoda OCTAVIA III head unit from Seicane. If you are the car owner of the Skoda, you can take it as reference.

2005-2010 Skoda OCTAVIA III after installation

2005-2010 Skoda OCTAVIA III after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2005-2010 Skoda OCTAVIA III head unit installation guide

1.Remove the trim panel with a lever.

Remove the trim panel with a lever

Remove the trim panel with a lever

2. Remove the panel on the radio with your hands.

Remove the panel on the radio with your hands

Remove the panel on the radio with your hands

3. Unscrew four screws holding the original car radio with a screwdriver.

Unscrew four screws holding the original car radio with a screwdriver

Unscrew four screws holding the original car radio with a screwdriver

4. Take the original car radio out of the dash.

Take the original car radio out of the dash

Take the original car radio out of the dash

5. Disconnect all the connectors at the back of the original car radio.

Disconnect all the connectors at the back of the original car radio

Disconnect all the connectors at the back of the original car radio

6. Check all the accessories for the new Seicane car stereo.

7. Connect the harnesses to the back of the new Seicane car stereo.

8. Connect the Seicane car stereo to your original car radio ‘s plugs.

9. Turn on the new Seicane car stereo to have a careful check if everything works well. If it

doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car stereo into the dash.

11. Put everything into their original place.

That’s all about the installation guide of the 2005-2010 Skoda OCTAVIA III head unit. If you find the picture shown above is different from your dashboard, please rest assured that the guide is much same. Or you can go to the dealer or professionals ask for help. Besides, the ideal new head unit is necessary for your car. If you are looking for one, this is the wonderful 2005-2010 Skoda OCTAVIA III head unit from Seicane and you can refer it.

http://www.seicane.com/android-2005-2010-skoda-octavia-iii-radio-dvd-player-gps-navigation-system-with-bluetooth-hd-touch-screen-obd-dvr-rearview-camera-mirror-link-tv-usb-sd-3g-wifi-ipod-s167032

This multifunctional 2005-2010 Skoda OCTAVIA III head unit designed with a large 7 inch multi-touch screen with 1024*600 HD pixel resolution, you must be surprised at its visually radiant performance and the simpler operation for navigation. The compatibility of USB wired connection and SD card slot enables you to have fun via a wide range of entertainment options, which can greatly entertain both you and your passengers. Wish you like it and have a good time with it!