Simple 12 steps to install a 2006-2010 TOYOTA Terios head unit with Bluetooth GPS DVD Player Auto AV 3G WiFi OBD2 Mirror Link AUX Video

2006-2010 TOYOTA Terios head unit after installation

If you haven’t upgraded a car stereo before, you may think it quite hard to install a new car stereo in your car. As a matter of fact, the installation is quite easy. You can either go to a car radio upgrade center or ask a professional for help. This passage is a professional installation guide from Seicane specially for a 2006-2010 TOYOTA Terios head unit, which can be taken as a reference if you own a 2006-2010 TOYOTA Terios.

2006-2010 TOYOTA Terios head unit after installation

2006-2010 TOYOTA Terios head unit after installation

Please notice before the installation:    

1. Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.

2. A lever and a screwdriver need to be prepared before the installation.

3. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2006-2010 TOYOTA Terios head unit installation guide

1.Remove two trim panels at each side of the center console and set it aside.

Remove two trim panels at each side of the center console and set it aside

Remove two trim panels at each side of the center console and set it aside

2.Remove the top panel and set it aside.

Remove the top panel and set it aside

Remove the top panel and set it aside

3.Remove 4 screws holding the unit with a Phillips screwdriver.

Remove 4 screws holding the unit with a Phillips screwdriver

Remove 4 screws holding the unit with a Phillips screwdriver

4.Gently take out the panel on the radio interface.

Gently take out the panel on the radio interface

Gently take out the panel on the radio interface

5.Take out the radio and disconnect cables at back of it.

Take out the radio and disconnect cables at back of it

Take out the radio and disconnect cables at back of it

6.Check all the accessories for the new Seicane head unit.

Check all the accessories for the new Seicane head unit

Check all the accessories for the new Seicane head unit

7.Connect the harnesses to the back of the new Seicane head unit.

Connect the harnesses to the back of the new Seicane head unit

Connect the harnesses to the back of the new Seicane head unit

8.Connect the Seicane head unit to your original car radio ‘s plugs.

9.Put the new Seicane head unit into the dash.

10.Turn on the new Seicane head unit and have a comprehensive check if it works well.

11.Install 4 screws back to their original position.

12.Install the trim panel back to its original place.

Wish the 2006-2010 TOYOTA Terios head unit installation above can be helpful you. If you have any question, it’s suggested you turn to your dealer for help. If you don’t have any experience on the installation, you’d better have it installed by a professional. Besides, you need to confirm your new stereo can be suitable for your car. To check the compatibility, you are welcome to click the link below which is about a top 2006-2010 TOYOTA Terios head unit from Seicane.

http://www.seicane.com/seicane-s126003-2-din-android-hd-touch-screen-2006-2010-toyota-terios-radio-with-bluetooth-gps-dvd-player-auto-av-3g-wifi-obd2-mirror-link-aux-video-backup-camera

With this advanced 2006-2010 TOYOTA Terios head unit in your car, the 3D GPS navigation enables you to go anywhere you like in the correct direction. With built-in Bluetooth, you can make and receive phone calls without taking your hands off the steering wheel control. In addition, you are allowed to enjoy the Bluetooth music. If you prefer to listen to your own music or videos, just simply connect your iPod or external USB or Micro SD card and play your files directly through this car DVD entertainment system! Have fun all the way from now on and good luck!

How to install a 2000-2007 TOYOTA Corolla car radio with Bluetooth GPS Navigation Touch Screen 3G WiFi Mirror Link AUX Rearview Camera 1080P video

2000-2007 TOYOTA Corolla car radio after installation

To install a new aftermarket car stereo, you can go to a car stereo upgrade center or ask a professional for help. But if you have some related experience before, you can also finish the installation on your own. If you own a 2000-2007 TOYOTA Corolla, you can take this 2000-2007 TOYOTA Corolla car radio installation guide from Seicane as a reference if you are going to replace your factory radio.

2000-2007 TOYOTA Corolla car radio after installation

2000-2007 TOYOTA Corolla car radio after installation

Please notice before the installation:    

1. Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.

2. A lever and a screwdriver need to be prepared before the installation.

3. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2000-2007 TOYOTA Corolla car radio installation guide

1. Remove two trim panels at each side of the center console and set it aside.

Remove two trim panels at each side of the center console and set it aside

Remove two trim panels at each side of the center console and set it aside

2. Remove the top panel and set it aside.

Remove the top panel and set it aside

Remove the top panel and set it aside

3. Remove 4 screws holding the unit with a Phillips screwdriver.

Remove 4 screws holding the unit with a Phillips screwdriver

Remove 4 screws holding the unit with a Phillips screwdriver

4. Gently take out the panel on the radio interface.

Gently take out the panel on the radio interface

Gently take out the panel on the radio interface

5. Take out the radio and disconnect cables at back of it.

Take out the radio and disconnect cables at back of it

Take out the radio and disconnect cables at back of it

6. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

7. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

8. Connect the Seicane car radio to your original car radio ‘s plugs.

9. Put the new Seicane car stereo into the dash.

10. Turn on the new Seicane car stereo and have a comprehensive check if it works well.

11. Install 4 screws back to their original position.

12. Install the trim panel back to its original place.

After reading this step-by-step installation instruction, can you install this 2000-2007 TOYOTA Corolla car radio in your car? If you find it too hard for you, you’d better turn to a professional for help. For any question, you can also seek help from your dealer.

In addition, a good car radio plays an important role in a successful upgrade. If you haven’t found an ideal car radio, you can refer to this excellent TOYOTA Corolla car radio from Seicane. Here’s the link, please click:

http://www.seicane.com/seicane-s126002-android-dvd-player-2000-2006-toyota-corolla-radio-upgrade-with-bluetooth-gps-navigation-head-unit-touch-screen-3g-wifi-mirror-link-aux-steering-wheel-control-rearview-camera-1080p-video

This remarkable TOYOTA Corolla car radio comes with a large 6.2 inch multi-touch screen. An illuminated face makes it easy to read and provides you with a better display. The built-in GPS can lead you to the desired destinations in the fastest way. Besides, you can have hands-free calls and stream from music via the bluetooth connection with your mobile phones. Other features include DVD, CD, MP4, MP3, MP2 and radio playback, IPod/IPhone charging, supporting steering wheel control and AUX, etc. Just take it right now and have fun!

A step-by-step installation guide for a 2005-2011 Kia rio head unit with GPS CD DVD Player Auto AV System Touch Screen Bluetooth WiFi 3G

2005-2011 Kia rio head unit after installation

Nowadays, it’s quite easy for a car owner to upgrade the capabilities. Finding an ideal car stereo for more convenience and fun on the way, you just need to know your car model and  manufacture year. About the installation, you can rest assured because it’s not too hard. The following 2005-2011 Kia rio head unit installation instruction from Seicane can be taken as a reference.

2005-2011 Kia rio head unit after installation

2005-2011 Kia rio head unit after installation

Tips about the installation: 

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2005-2011 Kia rio head unit installation guide

1. The original car radio.

The original car radio

The original car radio

2. Pry around the edges of the panel with a lever, and then remove the panel with your hands.

Pry around the edges of the panel with a lever, and then remove the panel with your hands

Pry around the edges of the panel with a lever, and then remove the panel with your hands

3. Disconnect all the connectors at the back of the panel.

Disconnect all the connectors at the back of the panel

Disconnect all the connectors at the back of the panel

4. Unscrew four screws holding the original radio in place with a screwdriver.

Unscrew four screws holding the original radio in place with a screwdriver

Unscrew four screws holding the original radio in place with a screwdriver

5. Take the original radio out of the dash.

Take the original radio out of the dash

Take the original radio out of the dash

6. Disconnect the connectors at the back of the original radio.

Disconnect the connectors at the back of the original radio

Disconnect the connectors at the back of the original radio

7. Check all the accessories for the new Seicane head unit.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

8. Connect the harnesses to the back of the new Seicane head unit.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

9. Connect the Seicane head unit to your original car radio’s plugs.

10. Turn on the new Seicane head unit to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11.Put the new Seicane head unit into the dash.

12. Put everything into their original place.

It’s quite easy to understand all the installation steps for the 2005-2011 Kia rio head unit, isn’t it ? If not, it’s suggested you consult your dealer. Or you can also directly have a professional install it. If you haven’t found an ideal head unit for your car, you can refer to this multifunctional 2005-2011 Kia rio head unit from Seicane. It comes with the latest features and capabilities for you to upgrade your factory radio. For more details, you can click:

http://www.seicane.com/seicane-s127678-hot-selling-android-2005-2011-kia-rio-gps-navigation-car-audio-system-touch-screen-am-fm-radio-bluetooth-music-3g-wifi-obd2-mirror-link-aux-backup-camera-usb-sd-1080p-video

This excellent 2005-2011 Kia rio head unit is quipped with a large 6.2 inch HD 800*480 multi-touch screen, it also comes with a lot of intelligent features, for instance, gps navigation system, bluetooth function, Ipod function, USB port, SD card slots. This unit is also at a very reasonable price which you are affordable to upgrade your factory radio. Just take it and have great fun on all ways!

Professional steps to install a 2007-2013 Jeep Wrangler Unlimited car radio with Touch Screen WiFi 3G Mirror Link OBD2 DVR AUX

2007-2013 Jeep Wrangler Unlimited car radio after installation

With a correct installation guide, can you install your new stereo in your car? Some of car owners with related installation experience may say yes. If you don’t have any experience at all, you may find it difficult for you to install it. In that case, you can ask a professional to help you. Now I’d like to share a step-by-step 2007-2013 Jeep Wrangler Unlimited car radio installation guide with you. Wish you can get some help from it.

2007-2013 Jeep Wrangler Unlimited car radio after installation

2007-2013 Jeep Wrangler Unlimited car radio after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2007-2013 Jeep Wrangler Unlimited car radio installation guide

1. The original car radio.

The original car radio

The original car radio

2. Remove the panel by prying the edges with a lever.

Remove the panel by prying the edges with a lever

Remove the panel by prying the edges with a lever

3. Unscrew four screws holding the original radio in place with a screwdriver.

Unscrew four screws holding the original radio in place with a screwdriver

Unscrew four screws holding the original radio in place with a screwdriver

4. Take the original radio out of the dash.

Take the original radio out of the dash

Take the original radio out of the dash

5. Disconnect the connectors at the back of the original radio.

Disconnect the connectors at the back of the original radio

Disconnect the connectors at the back of the original radio

6. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

7. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

8. Connect the Seicane car radio to your original car radio ‘s plugs.

9. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10.Put the new Seicane radio into the dash.

11. Put everything into their original place.

The step-by-step 2007-2013 Jeep Wrangler Unlimited car radio installation guide is shown as the above. Wish you can get some help from it. If there is any question, you can consult your dealer. However, if you can’t finish it on your own, you’d better ask a professional for help. If you are still looking for an ideal car stereo for your car, you can refer to this amazing Jeep Wrangler Unlimited car radio from Seicane. Please click for more details:

http://www.seicane.com/seicane-s126061-in-dash-2007-2013-jeep-wrangler-unlimited-radio-upgrade-with-android-dvd-player-bluetooth-gps-navigation-car-audio-system-touch-screen-wifi-3g-mirror-link-obd2-backup-camera-dvr-aux

This amazing Jeep Wrangler Unlimited car radio comes with a gps navigation system , you will have no trouble in finding the unfamiliar or even hard-to-find locations with the least time. You can also use this navigation DVD player to pair with your cell phone to use bluetooth for hands-free phone calls or playing bluetooth streaming music. What’s more, this dvd player has USB/SD/iPod connection for multimedia playing.

 

How to replace a Nissan Universal head unit with Quad-core CPU Bluetooth Radio Tuner 3G WiFi HD 1024*600 Multi-touch Screen

Nissan Universal head unit after installation

Some car owners may think it difficult to install a new head unit. In fact, if you have some related experience and a correct installation guide, you can also easily achieve the installation on your own. Now I’d like to share a step-by-step Nissan Universal head unit installation guide with you. If you own a Nissan Universal head unit and have the same dashboard as the picture below, you can take it as a reference.

Nissan Universal head unit after installation

Nissan Universal head unit after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

Nissan Universal head unit installation guide

Step 1: Use a screwdriver to remove two screws above the original car radio.

Use a screwdriver to remove two screws above the original car radio

Use a screwdriver to remove two screws above the original car radio

Step 2:  Remove the trim panel.

Please wedge a flat tip screwdriver under the trim panel and pry up on it to remove the trim panel. To protect the trim from being accidentally scratched, you can use a clean rag while prying up on the trim panel.

Remove the trim panel

Remove the trim panel

Step 3: Unscrew the four screws which are holding the factory radio in place with a screwdriver. Then gently take the factory radio off the panel.

Unscrew the four screws which are holding the factory radio in place with a screwdriver. Then gently take the factory radio off the panel

Unscrew the four screws which are holding the factory radio in place with a screwdriver. Then gently take the factory radio off the panel

Step 4: Disconnect the radio antenna in the back of the factory radio and unplug the electrical plugs running to the back of the radio.

Disconnect the radio antenna in the back of the factory radio and unplug the electrical plugs running to the back of the radio

Disconnect the radio antenna in the back of the factory radio and unplug the electrical plugs running to the back of the radio

Step 5: Check all the accessories for the new Seicane head unit.

Check all the accessories for the new Seicane head unit

Check all the accessories for the new Seicane head unit

Step 6. Connect the harnesses to the back of the new Seicane head unit.

Connect the harnesses to the back of the new Seicane head unit

Connect the harnesses to the back of the new Seicane head unit

Step 7. Connect the Seicane head unit to your original car radio ‘s plugs.

Step 8: Turn on the new Seicane head unit to have a careful check if it works well with your car. If it doesn’t, please check whether all the cables are connected correctly.

Step 9: After the test, please put the new Seicane head unit into the dash.

Step 10: Install all the screws and the trim panel into their orig

The step-by-stepinstallation guide for a Nissan Universal head unit is shown as the above. Wish you can get some help from it. If there is any question, you can consult your dealer. However, if you can’t finish it on your own, you’d better ask a professional for help. If you are still looking for an ideal car stereo for your car, you can refer to this amazing Nissan Universal head unitfrom Seicane. Please click for more details:

http://www.seicane.com/seicane-s126006t-2-din-universal-android-dvd-player-gps-navigation-in-car-system-with-quad-core-cpu-bluetooth-radio-tuner-mirror-link-obd2-3g-wifi-hd-1024-600-multi-touch-screen-s126006t

This modern Nissan Universal head unit comes with a large amount of features such as built-in GPS navigation system, Bluetooth hands-free calls, Bluetooth streaming music, DVD, CD, FM/AM radio tuners, Ipod, etc. You can install this aftermarket car stereo in the dash of your vehicle to navigate as well as enjoy your favorite music while you are driving. With you have a wonderful time with this amazing Nissan Universal head unit on all your trips!

Professional installation steps for a 2009-2014 Toyota Sienna car stereo with 3G WiFi Bluetooth Music USB SD 1024*600 Multi-touch Capacitive Screen HD 1080P Video

2009-2014 Toyota Sienna car stereo after installation

To install an ideal car stereo in your car, what can be much helpful? It is absolutely a step-by-step installation guide. If you are a car owner of a2009-2014 Toyota Sienna, you must be quite familiar with the picture below. It’s a 2009-2014 Toyota Sienna car stereo from Seicane taken after the installation. With the same dashboard, you can refer to this professional 2009-2014 Toyota Sienna car stereo installation instruction if you are going to install your new stereo in your car.

2009-2014 Toyota Sienna car stereo after installation

2009-2014 Toyota Sienna car stereo after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2009-2014 Toyota Sienna car stereo installation guide

1.Use a lever to pry along the plastic panel and remove it.

Use a lever to pry along the plastic panel and remove it

Use a lever to pry along the plastic panel and remove it

2. Release the panel under the 50 shift and hang it on the panel.

Release the panel under the 50 shift and hang it on the panel

Release the panel under the 50 shift and hang it on the panel

3. Remove the a/c control unit with your hands.

Remove the ac control unit with your hands

Remove the ac control unit with your hands

4. Unplug the connectors at the back of the a/c control unit.

Unplug the connectors at the back of the ac control unit

Unplug the connectors at the back of the ac control unit

5. Remove the screws holding the factory radio in place with a screwdriver.

Remove the screws holding the factory radio in place with a screwdriver

Remove the screws holding the factory radio in place with a screwdriver

6. Take the factory radio out of the dashboard.

Take the factory radio out of the dashboard

Take the factory radio out of the dashboard

7. Disconnect the connectors at the back of factory radio.

8. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

Check all the accessories for the new Seicane car stereo

9. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

Connect the harnesses to the back of the new Seicane car stereo

10. Connect the Seicane car stereo to your original car radio ‘s plugs.

11.Put the new Seicane car stereo into your dashboard, you should check whether your connections are correct, the new unit is in right position, and you’d better have a tidy for the cables.

12. Check whether the new Seicane car stereo is working without problem.

13. If there is no problem, firm removed screws that are put aside, then make trim panel back on your new Seicane car stereo.

Can you finish the installation of this 2009-2014 Toyota Sienna car stereo on your own with the help of this step-by-step installation guide? If not, you’d better ask a professional for help, or you can go to a car radio upgrade center to have it installed.

In addition, before the installation, it’s necessary for you to check the compatibility of your new car stereo. If you have no idea about this, you can refer to this popular Toyota Sienna car stereo from Seicane. Here’s the link, please click:

http://www.seicane.com/seicane-s128006-android-2009-2014-toyota-sienna-aftermarket-car-stereo-radio-dvd-gps-navigation-system-with-3g-wifi-bluetooth-music-mirror-link-obd2-usb-sd-1024-600-multi-touch-capacitive-screen-hd-1080p-video-steering-wheel-control-s12800

This 8 inch 2009-2014 Toyota Sienna car stereo comes with a built-in gps navigation system, you can have the accurate directions to your desired destinations with the least time. What’s more, you can also use this New Focus double din navigation for bluetooth hands-free phone calls or streaming music by connecting the bluetooth and your bluetooth-enabled cell phone. Besides, the functionality of USB/SD/iPod connection for multimedia playing can brings you lots of pleasure and relaxation. Just have fun with it!

How to upgrade a 2009-2013 VW Volkswagen BORA head unit with DVD player GPS navigation 3G WiFi Mirror Link OBD2 Bluetooth

2009-2013 VW Volkswagen BORA head unit after installation

To enjoy the GPS function in your car, you can easily upgrade your factory radio with a multifunctional car stereo if there isn’t any navigation function in your car. You may think it too difficult to install a new stereo. In fact, it’s quite easy. And a detailed installation guide can be much helpful for you. The following is a step-by-step installation guide from Seicane particularly for a 2009-2013 VW Volkswagen BORA head unit. With the same dashboard as below ,you can also take it as a reference.

2009-2013 VW Volkswagen BORA head unit after installation

2009-2013 VW Volkswagen BORA head unit after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2009-2013 VW Volkswagen BORA head unit installation guide

1. Remove the top panel with a lever.

Remove the top panel with a lever

Remove the top panel with a lever

2. Disconnect the connector at the back of the panel.

Disconnect the connector at the back of the panel

Disconnect the connector at the back of the panel

3. Unscrew the screw with a screwdriver.

Unscrew the screw with a screwdriver

Unscrew the screw with a screwdriver

4. Remove the metal sheet on the top with your hands.

Remove the metal sheet on the top with your hands

Remove the metal sheet on the top with your hands

5. Unscrew two screws circled in red shown as follows under the metal sheet.

Unscrew two screws circled in red shown as follows under the metal sheet

Unscrew two screws circled in red shown as follows under the metal sheet

6. Remove the air conditioner vent with your hands.

Remove the air conditioner vent with your hands

Remove the air conditioner vent with your hands

7. Unscrew two screws under the vent with a screwdriver.

Unscrew two screws under the vent with a screwdriver

Unscrew two screws under the vent with a screwdriver

8. Remove the panel on the original car radio.

Remove the panel on the original car radio

Remove the panel on the original car radio

9. Unscrew four screws holding the original car radio with a screwdriver.

Unscrew four screws holding the original car radio with a screwdriver

Unscrew four screws holding the original car radio with a screwdriver

10. Take the original car radio out of the dash.

Take the original car radio out of the dash

Take the original car radio out of the dash

11. Disconnect all the connectors at the back of the original car radio.

Disconnect all the connectors at the back of the original car radio

Disconnect all the connectors at the back of the original car radio

12. Check all the accessories for the new Seicane head unit.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

13. Connect the harnesses to the back of the new Seicane head unit.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

14. Connect the Seicane head unit to your original car radio ‘s plugs.

15. Turn on the new Seicane head unit to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

16.Put the new Seicane head unit into the dash.

17. Put everything into their original place.

Above all, you need to make clear about every step before you start to install this 2009-2013 VW Volkswagen BORA head unit in your car. If there is any question, you can seek help from your dealer. If you don’t have any experience on the installation, it’s strongly suggested you ask a professional to install your new unit. If you are still looking for a suitable head unit for your car, I’d like to recommend an amazing 2009-2013 VW Volkswagen BORA head unit from Seicane to you. Please click for more details:

http://www.seicane.com/seicane-s128405-8-inch-android-dvd-radio-car-navigation-head-unit-for-2008-2013-vw-volkswagen-scirocco-with-3g-wifi-mirror-link-obd2-bluetooth

This modern 2009-2013 VW Volkswagen BORA head unit is a smart upgrade to your stock radio system. Guidance with the 3D GPS, you can go anywhere you like. You can also pair Bluetooth-enabled devices for hands-free calls and streaming from music or connect devices via the USB port to listen to your favorite playlists. With the ability to play DVD, DIVX,VCD, MP4, MP3,MP2 and CD, the audio DVD player with 8 inch digital touch screen is a smart choice to replace your existing radio system. Wish you have a wonderful time with this intelligent 2009-2013 VW Volkswagen BORA head unit on all your trips!

How to easily install a 2003-2013 VW Volkswagen Touran car stereo with DVD player GPS navigation 8 inch 1024*600 multi-touch screen

2003-2013 VW Volkswagen Touran car stereo after installation

Here comes an attractive 2003-2013 VW Volkswagen Touran car stereo from Seicane after installation. With such an aftermarket car radio in your car, a lot of convenience and enjoyment are easily available for you, such as GPS navigation, Bluetooth streaming music and hands-free calls, etc. To install it in your car, you can find a correct installation guide to help you. The following is a detailed instruction for a VW Volkswagen Touran car stereo in particular, which can be helpful for you if you own a 2003-2013 VW Volkswagen Touran.

2003-2013 VW Volkswagen Touran car stereo after installation

2003-2013 VW Volkswagen Touran car stereo after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2003-2013 VW Volkswagen Touran car stereo installation guide

1. Remove the top panel with a lever.

Remove the top panel with a lever

Remove the top panel with a lever

2. Disconnect the connector at the back of the panel.

Disconnect the connector at the back of the panel

Disconnect the connector at the back of the panel

3. Unscrew the screw with a screwdriver.

Unscrew the screw with a screwdriver

Unscrew the screw with a screwdriver

4. Remove the metal sheet on the top with your hands.

Remove the metal sheet on the top with your hands

Remove the metal sheet on the top with your hands

5. Unscrew two screws circled in red shown as follows under the metal sheet.

Unscrew two screws circled in red shown as follows under the metal sheet

Unscrew two screws circled in red shown as follows under the metal sheet

6. Remove the air conditioner vent with your hands.

Remove the air conditioner vent with your hands

Remove the air conditioner vent with your hands

7. Unscrew two screws under the vent with a screwdriver.

Unscrew two screws under the vent with a screwdriver

Unscrew two screws under the vent with a screwdriver

8. Remove the panel on the original car radio.

Remove the panel on the original car radio

Remove the panel on the original car radio

9. Unscrew four screws holding the original car radio with a screwdriver.

Unscrew four screws holding the original car radio with a screwdriver

Unscrew four screws holding the original car radio with a screwdriver

10. Take the original car radio out of the dash.

Take the original car radio out of the dash

Take the original car radio out of the dash

11. Disconnect all the connectors at the back of the original car radio.

Disconnect all the connectors at the back of the original car radio

Disconnect all the connectors at the back of the original car radio

12. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

13. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

14. Connect the Seicane car stereo to your original car radio ‘s plugs.

15. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

16.Put the new Seicane car stereo into the dash.

17. Put everything into their original place.

The step-by-step installation guide for a 2003-2013 VW Volkswagen Touran car stereo is shown as the above. Wish you can get some help from it. If there is any question, you can consult your dealer. However, if you can’t finish it on your own, you’d better ask a professional for help. If you are still looking for an ideal car stereo for your car, you can refer to this amazing 2003-2013 VW Volkswagen Touran car stereofrom Seicane. Please click for more details:

http://www.seicane.com/seicane-s128405-8-inch-android-dvd-radio-car-navigation-head-unit-for-2008-2013-vw-volkswagen-scirocco-with-3g-wifi-mirror-link-obd2-bluetooth

This powerful VW Volkswagen Touran car stereo is running on the latest Android 5.1.1 operating system right now, which is currently one of the best GPS running operating system features lane assist, voice guidance, 3D views, intelligent route planning, points of interest (POI) notifications and more. There is also the standard AM and FM radio receiver as well as the ability to play CDs and to attach your iPod so you can play music directly from your iPod player through your car speakers. Wish you like this wonderful VW Volkswagen Touran car stereo and have a great time with it! Good luck!

 

How to easily replace a 2003-2013 VW Volkswagen Golf 5(MK5) car stereo with 3G WiFi Bluetooth Android 5.1.1 Quad-core CPU

With a multifunctional car stereo in your car, a brand new driving experience is easily available for you with its great functionalities. Therefore, more and more car owner choose to replace the factory radio for more convenience and enjoyment. If you have no idea about the installation, you can refer to this professional 2003-2013 VW Volkswagen Golf 5(MK5) car stereo installation guide from Seicane if you also have the same dashboard as the picture below.

2003-2013 VW Volkswagen Golf 5(MK5) car stereo after installation

2003-2013 VW Volkswagen Golf 5(MK5) car stereo after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2003-2013 VW Volkswagen Golf 5(MK5) car stereo installation guide

1. Remove the top panel with a lever.

Remove the top panel with a lever

Remove the top panel with a lever

2. Disconnect the connector at the back of the panel.

Disconnect the connector at the back of the panel

Disconnect the connector at the back of the panel

3. Unscrew the screw with a screwdriver.

Unscrew the screw with a screwdriver

Unscrew the screw with a screwdriver

4. Remove the metal sheet on the top with your hands.

Remove the metal sheet on the top with your hands

Remove the metal sheet on the top with your hands

5. Unscrew two screws circled in red shown as follows under the metal sheet.

Unscrew two screws circled in red shown as follows under the metal sheet

Unscrew two screws circled in red shown as follows under the metal sheet

6. Remove the air conditioner vent with your hands.

Remove the air conditioner vent with your hands

Remove the air conditioner vent with your hands

7. Unscrew two screws under the vent with a screwdriver.

Unscrew two screws under the vent with a screwdriver

Unscrew two screws under the vent with a screwdriver

8. Remove the panel on the original car radio.

Remove the panel on the original car radio

Remove the panel on the original car radio

9. Unscrew four screws holding the original car radio with a screwdriver.

Unscrew four screws holding the original car radio with a screwdriver

Unscrew four screws holding the original car radio with a screwdriver

10. Take the original car radio out of the dash.

Take the original car radio out of the dash

Take the original car radio out of the dash

11. Disconnect all the connectors at the back of the original car radio.

Disconnect all the connectors at the back of the original car radio

Disconnect all the connectors at the back of the original car radio

12. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

13. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

14. Connect the Seicane car stereo to your original car radio ‘s plugs.

15. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

16.Put the new Seicane car stereo into the dash.

17. Put everything into their original place.

After reading this step-by-step installation guide for a 2003-2013 VW Volkswagen Golf 5(MK5) car stereo, can you finish the installation on your own? If not, you can ask a professional for help. If you find the dashboard shown the above is different from yours, please rest assured, it won’t have much influence on the whole.

Some of you may haven’t found a suitable car stereo yet. Please don’t worry, here I’d like to introduce an intelligent 2003-2013 VW Volkswagen Golf 5(MK5) car stereo from Seicane to you. Here’s the link, please click:

http://www.seicane.com/seicane-s128405-8-inch-android-dvd-radio-car-navigation-head-unit-for-2008-2013-vw-volkswagen-scirocco-with-3g-wifi-mirror-link-obd2-bluetooth

Just Reach your destination with this 8 inch VW Volkswagen Golf 5(MK5) car stereo, which features a built-in navigation to offer spoken turn-by-turn directions. Stream music and make hands-free calls from your Bluetooth-enabled mobile phones. You not only have a safe driving all the way, but also enjoy a lot of interesting experience with the company of this wonderful car stereo. Good luck to you!

How to install a 2007-2012 GMC Yukon Acadia car stereo with AM FM Radio 3G WiFi Bluetooth Mirror Link OBD2 16G Flash

2007-2012 GMC Yukon Acadia car stereo after installation

To get to your desired destination, you can easily turn on your real-time GPS navigation system which can provide you with the turn-by-turn direction and voice prompts. If your factory radio doesn’t come with this function, it’s wise of you to replace it with a new aftermarket multifunctional car stereo. To help you better install a new car stereo, I’d like to recommend a step-by-step 2007-2012 GMC Yukon Acadia car stereo installation guide from Seicane to you. Wish you can get some help from it.

2007-2012 GMC Yukon Acadia car stereo after installation

2007-2012 GMC Yukon Acadia car stereo after installation

Precautions:

1. Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.

2. A lever and a screwdriver need to be prepared before the installation.

3. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2007-2012 GMC Yukon Acadia car stereo installation guide

1. The original car radio.

The original car radio

The original car radio

2. Pry the edges of the panel with a lever, then remove it.

Pry the edges of the panel with a lever, then remove it

Pry the edges of the panel with a lever, then remove it

3. Unscrew eight bolts with a screwdriver holding the original radio and the a/c climate unit in place.

Unscrew eight bolts with a screwdriver holding the original radio and the ac climate unit in place

Unscrew eight bolts with a screwdriver holding the original radio and the ac climate unit in place

4. Remove the a/c climate controller.

Remove the ac climate controller

Remove the ac climate controller

5. Take the original radio out of the dash.

Take the original radio out of the dash

Take the original radio out of the dash

6. Disconnect all the connectors at the back of the original radio.

Disconnect all the connectors at the back of the original radio

Disconnect all the connectors at the back of the original radio

7. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

8. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

9. Connect the Seicane car stereo to your original car radio ‘s plugs.

10. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car stereo into the dash.

12. Put everything into their original place.

 

That’s all the installation guide for a 2007-2012 GMC Yukon Acadia car stereo. If you have any question, please seek help from your dealer. If it’ s the first time for you to install a new ca stereo, you’d better ask a professional for help.

If you don’t have find a suitable car stereo for your car, I’d like to share a great 2007-2012 GMC Yukon Acadia car stereo from Seicane with you. Here’s the link, please click:

http://www.seicane.com/seicane-s127012-android-head-unit-dvd-gps-system-for-2007-2012-gmc-yukon-tahoe-acadia-with-am-fm-radio-3g-wifi-bluetooth-mirror-link-obd2

This GMC Yukon Acadia car stereo comes with built-in GPS navigation system to provide you with the accurate 3D navigation and 7-inch digital high-definition touch screen for a better display, and built-in Bluetooth for hands-free phone calls and streaming music. It’s the remarkable car stereo with the latest software and firmware for upgrading your stock radio. Just take it and upgrade your factory radio right now!