Monthly Archives: December 2015

14 steps to install a 2008 2009 2010 Toyota Prado Radio

Posted on by

If you have a Toyota Prado of 2008-2010, you need to know removal guide for 2008-2010 Toyota Prado Radio car stereo.Many people invite the professional workers when they install the head unit, but most people do it by themselves. Let’s have a look at the new unit after installation,stereo radio of 2008-2010 Toyota Prado first.

2010-2013 Toyota PRADO Radio after installation

2008-2010 Toyota PRADO Radio after installation

If you are not satisfied with your car’s recent radio, you can take the following advice as references.In fact,all the car DVD players are substantially identical but with minor differences. Therefore knowing how to remove 2010-2013 Toyota Prado Radio means that you can install car dvd player by yourself.Before discussing the installation, I will give you some advices about safety first.

When we are using the car DVD player, safety is the most important thing.Please do not stare at car DVD while driving, as it can disturb your attention.In addition, do not splash liquid on the unit for getting high playing quality.

The following are the removal steps for car’s head unit.

1.Take out the two blots that distributed on both sides of handbrake

2010-2013 Toyota PRADO Radio installation step 1

2008-2010 Toyota PRADO Radio installation step 1

2.Remove screws by your hand

2010-2013 Toyota PRADO Radio installation step 2

2008-2010 Toyota PRADO Radio installation step 2

3.After the bolts are removed,take out the left and right loosed dashboard

2010-2013 Toyota PRADO Radio installation step 3

2008-2010 Toyota PRADO Radio installation step 3

4.Disconnect the cable between them

2010-2013 Toyota PRADO Radio installation step 4

2008-2010 Toyota PRADO Radio installation step 4

5.Get out the screw by using your hand

2010-2013 Toyota PRADO Radio installation step 5

2008-2010 Toyota PRADO Radio installation step 5

6.Remove five screws as the picture show

2010-2013 Toyota PRADO Radio installation step 6

2008-2010 Toyota PRADO Radio installation step 6

7.Pull off the CD player

2010-2013 Toyota PRADO Radio installation step 7

2008-2010 Toyota PRADO Radio installation step 7

8.Disconnect the cables between them Gently

2010-2013 Toyota PRADO Radio installation step 8

2008-2010 Toyota PRADO Radio installation step 8

9.Connect the cables on the new head unit as the user manual shows and place them well.

10.Put the new head unit into the dash.

11.Turn on the new head unit and have a comprehensive check if it works well.

12.Install 4 screws back to their original position.

13.Check whether the unit is working without problem.

14.If everything is OK, make trim panel back on your new Seicane radio.

There are some details to mind during the following steps: you should slide the unit into the dash then connect the negative cable to the original wiring harness.Please remember that the wires should be connected correctly and the same to battery installation.

After your installation of Toyota Prado Radio turn on the new unit and operate it as the user instruction said.Check out all the functions in the unit and see whether everything works well or not. If it doesn’t, check the wires connections again or contact the technicians from the dealer for help.

Through the detailed description,I hold that you have mainly grasped how to remove original CD player of the car.For more information,please visit:

http://www.seicane.com/9-inch-aftermarket-android-touch-screen-gps-navigation-system-for-2008-2009-2010-toyota-prado-support-bluetooth-radio-tpms-dvr-obd-ii-rear-camera-aux-headrest-monitor-control-usb-sd-hd-1080p-video-3g-wifi-s082691

If you still have any problem on it,ask someone who works in this field for help.You will get a pleasant installation journey and you will find how convinent and perfect when the GPS Navigation System comes in your car.

A new 2005 2006 2007 2008 Porsche BOXSTER car stereo installation guide

Posted on by

Are you desired to upgrade your factory radio with a new 2005 2006 2007 2008 Porsche BOXSTER car stereo and confused by the installation? Then this article which helps you with the installation of a new car stereo is what you are looking for. Actually, the installation of a new car stereo is quite simple, you can do it on your own under the guidance of the right instructions if you have some similar removal or installation experience on the car. If not, on the other hand, you’d better have it installed in case of unexpected damage of both the new car stereo and your car.

 

2005 2006 2007 2008 Porsche BOXSTER car stereo after installation

2005 2006 2007 2008 Porsche BOXSTER car stereo after installation

The following is the detailed installation guide on a new 2005 2006 2007 2008 Porsche BOXSTER car stereo. You can take it as a reference and have a general idea before you start.

 

Precautions:

1)       Please disconnect the negative cable of the battery for your safety.

2)       Please prepare a screwdriver before the installation.

 

The below is the step-by-step instruction of the removal and the installation of a new 2005 2006 2007 2008 Porsche BOXSTER car stereo:

  1. The original radio before the upgrade.

    2005 2006 2007 2008 Porsche BOXSTER car stereo installation step 1

    2005 2006 2007 2008 Porsche BOXSTER car stereo installation step 1

  2. Remove the screw on the carpet which is on the side of the radio with a screwdriver, and then the carpet comes out.
    2005 2006 2007 2008 Porsche BOXSTER car stereo installation step 2-1

    2005 2006 2007 2008 Porsche BOXSTER car stereo installation step 2-1

    2005 2006 2007 2008 Porsche BOXSTER car stereo installation step 2-2

    2005 2006 2007 2008 Porsche BOXSTER car stereo installation step 2-2

  3. Remove the other two screws which hold the panel on one side, then slide out the panel. After that, do the same thing on the other side.
    2005 2006 2007 2008 Porsche BOXSTER car stereo installation step 3-1

    2005 2006 2007 2008 Porsche BOXSTER car stereo installation step 3-1

    2005 2006 2007 2008 Porsche BOXSTER car stereo installation step 3-2

    2005 2006 2007 2008 Porsche BOXSTER car stereo installation step 3-2

  4. Remove two locking screws on each side of the radio with a screwdriver.

    2005 2006 2007 2008 Porsche BOXSTER car stereo installation step 4

    2005 2006 2007 2008 Porsche BOXSTER car stereo installation step 4

  5. Carefully take the radio out of the dashboard.

    2005 2006 2007 2008 Porsche BOXSTER car stereo installation step 5

    2005 2006 2007 2008 Porsche BOXSTER car stereo installation step 5

6. Disconnect the connectors at the back of the radio.

7. Connect the cables of the new Seicane car stereo as the user manual shows.

8. Gently put the new Seicane car stereo back into the dash.

9. Turn on the new Seicane car stereo and have a comprehensive test if everything works well.

10. After checking the new Seicane car stereo works well, install four screws holding the radio on both sides, and then install four screws which hold the panels on both sides of the radio. At last, put the carpet back into its original place and install the screw which holds the carpet on the cover.

 

To make sure you can upgrade your radio successfully, the most important thing you need to pay attention is that you should have a right car stereo which can fit your car. If you haven’t had one yet, I’d like to recommend an amazing 2005-2008 Porsche BOXSTER car stereo from Seicane to you.

 

http://www.seicane.com/car-dvd-player-for-porsche-boxster-with-gps-radio-tv-bluetooth-srd-8815-1

 

What’s the most worthwhile lies in that a fiber optic decoder can be supported by this car stereo. If you have a 2005-2008 Porsche BOXSTER which also comes with Bose system, you can install a decoder to this radio to make your Bose system still work after the installation of the new car stereo. The decoder is plug and play and easy to install, and you don’t need to modify or cut any wire of your car. The sound is of high quality after installation. On the hand other, this car stereo is plug and play and easy to install if you don’t have a Bose system in your car.

 

This powerful WINCE 6.0 CORE DVD GPS navigation system for 2005-2008 Porsche BOXSTER is designed to upgrade your navigation, entertainment, and communication experience. The latest GPS system with turn-by-turn directions and voice prompts can guide you to anywhere you want. A multiple audio and video formats are supported to enrich your entertainment experience, such as region-free DVD, VCD, HVCD, MP4, MP3, CD, AVI and DIVX, you can play whatever program to amuse yourself and your passengers. To pair your mobile phone which has Bluetooth with this unit, you can make and receive calls without taking your hands off the steering wheel control as well as enjoy your favorite music while you are driving.

 

Just get this 2005 2006 2007 2008 Porsche BOXSTER car stereo at such a competitive price right now and have a brilliant experience!

11 steps to install 2002 2003-2011 Nissan MURANO Radio

Posted on by

Thesedays, it’s a good idea to replace it with a modern aftermarket car stereo with a number of practical and entertainment capabilities. If you own a 2002-2011 Nissan MURANO Radio, to install a new 2002-2011 Nissan MURANO Radio with comprehensive features will definitely bring you an extraordinary driving experience.

Before installation show you the Seicane 2002-2011 Nissan MURANO Radio.

2002-2011 Nissan MURANO Radio after installation

2002-2011 Nissan MURANO Radio after installation

If you have the same dashboard with the picture above, you can follow the instruction below.

 

Some safety notes

1)Please apply the parking brake before the upgrade.

2)Please disconnect the negative cable on the vehicle battery to ensure security.

3)Please prepare tools for the upgrade. A lever and a screwdriver are needed.

4)Please protect the front seats and trim panel during upgrade.

2002-2011 Nissan MURANO Radio installation

1)Disconnect the cable running to the negative battery terminal by loosening the nut on the cable clamp and pulling the cable off the negative terminal.

2)Remove the two screws above the Nissan MURANO Radio opening with the head screwdriver.

2002-2011 Nissan MURANO Radio installation step 1

2002-2011 Nissan MURANO Radio installation step 1

3)Pull the radio trim panel off. You may need to wedge a flat tip screwdriver under the trim and pry up on it to remove the trim. Use a clean rag to protect the trim from being accidentally scratched while prying up on the trim.

2002-2011 Nissan MURANO Radio installation step 2

2002-2011 Nissan MURANO Radio installation step 2

4)Remove the four screws holding the radio in place using a head screwdriver and pull the radio out.

2002-2011 Nissan MURANO Radio installation step 3

2002-2011 Nissan MURANO Radio installation step 3

5)Disconnect the radio antenna in the back of the radio and unplug the electrical plugs running to the back of the radio.

2002-2011 Nissan MURANO Radio installation step 4

2002-2011 Nissan MURANO Radio installation step 4

6)Connect the cables on the new head unit as the user manual shows and place them well.

7)Put the new head unit into the dash.

8)Turn on the new head unit and have a comprehensive check if it works well.

9)Install 4 screws back to their original position.

10)Check whether the unit is working without problem.

11)If everything is OK, make trim panel back on your new Seicane radio.

 

Of course,there may have other situations.You’d better ask some professionals for help at the first time.If the steps of radio ramoval are too difficult to you,you should go to a car radio shop to remove your factory radio.

Some of you may haven’t got a suitable aftermarket radio for your Nissan MURANO.Here is a good aftermarket car radio I want to share with you.It has many useful functions,such as bluetooth,3D navigation,car DVR and so on.More about this unit:

http://www.seicane.com/android-dvd-radio-gps-navigation-system-for-2002-2011-nissan-murano-with-bluetooth-mirror-link-hd-1024-600-touch-screen-obd2-dvr-tv-usb-sd-rearview-camera-1080p-video-ipod-3g-wifi-s166226

You can dial, answer, reject and mute calls without taking your hands off the steering wheel. And you can perform Google search on the road with quick search box, play online games, watch videos, download online data and check emails by connecting to any WiFi hotspot in range or 3g internet, download any applications in the android market for access to games, Skype, MSN, YouTube, twitter, E-Book, Gmail etc and so on.

 

Wish this essay can benefit you and have a good trip with your new Nissan MURANO Radio!

An installation guide of a new 2005-2012 Mercedes Benz GL Class X164 car stereo with DVD Bluetooth GPS navigation

Posted on by

Installing a new 2005-2012 Mercedes Benz GL Class X164 car stereo in your car to enjoy your favorite music, watch your favorite videos and listen to your favorite radio station while navigating to your desired destination sounds so cool, doesn’t it? Modern car stereos integrated  a number of features in one unit definitely come with a lot of powerful capabilities to meet your needs and absolutely bring you an amazing driving experience. If you want this and are going to upgrade your factory radio, you can install it by yourself now with the following installation guide specially for a 2005-2012 Mercedes Benz GL Class X164 car stereo. If you don’t have any experience on the installation of a new car stereo, you can also ask a professional technician for help.

2005-2012 Mercedes Benz GL Class X164 car stereo after installation

2005-2012 Mercedes Benz GL Class X164 car stereo after installation

Tips about the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

 

The below is the step-by-step instruction on how to install a 2005-2012 Mercedes Benz GL Class X164 car stereo:

  1. Pry out the air conditioner panel along gap with a lever.

    2005-2012 Mercedes Benz GL Class X164 car stereo installation step 1

    2005-2012 Mercedes Benz GL Class X164 car stereo installation step 1

  2. Remove the air conditioner panel.

    2005-2012 Mercedes Benz GL Class X164 car stereo installation step 2

    2005-2012 Mercedes Benz GL Class X164 car stereo installation step 2

  3. Remove two screws holding the stereo in the dashboard frame with a screwdriver.

    2005-2012 Mercedes Benz GL Class X164 car stereo installation step 3

    2005-2012 Mercedes Benz GL Class X164 car stereo installation step 3

  4. Pull the buckles down.

    2005-2012 Mercedes Benz GL Class X164 car stereo installation step 4

    2005-2012 Mercedes Benz GL Class X164 car stereo installation step 4

  5. Carefully take the original CD player out of the dashboard.

    2005-2012 Mercedes Benz GL Class X164 car stereo installation step 5

    2005-2012 Mercedes Benz GL Class X164 car stereo installation step 5

  6. Disconnect the ISO plug of the car in the socket of the DVD player.

    2005-2012 Mercedes Benz GL Class X164 car stereo installation step 6

    2005-2012 Mercedes Benz GL Class X164 car stereo installation step 6

7.  Connect the cables of the new Seicane car stereo as the user manual shows.

8.  Connect the ISO plug.

9.  Put the new Seicane car stereo back into the dash.

10. Put the buckles back into its original place.

11. Install two screws and the air conditioner panel.

12. Turn on the new Seicane radio and have a comprehensive test if everything works well.

 

Warning:

Please don’t pull out the GPS SD card with the power on in case of data corruption.

 

Installation tips for the GPS antenna.

Please don’t shorten or lengthen the GPS antenna to avoid a short circuit or antenna problems. Please place the antenna on the dashboard or on the roof of the car in a horizontal position as best as possible. If there if any film on the windows and heat insulation in the car, it may have a direct effect on the GPS antenna, like positioning precision and signal intensity.

 

Wish the above instruction can give you a general idea on the installation. If you have any further questions during the process of the installation, it’s suggested you turn to your dealer for help. But if you don’t have a new car stereo now, I’d like to recommend a fantastic 2005-2012 Mercedes Benz GL Class X164 car stereo from Seicane to you:

 

http://www.seicane.com/android-4-4-4-2005-2012-mercedes-benz-gl-class-x164-gl300-gl350-gl420-gl450-gl500-gl550-autoradio-navigation-car-audio-system-1024-600-multi-touch-capacitive-screen-radio-rds-blutooth-music-dvd-3g-wifi-mirror-link-obd2-k7511

 

The biggest advantage of this unit is that it can support a fiber optic decoder. If your car comes with Bose system and the year of your car is from 2005 to 2011, you can install a decoder to make your Bose system working after installing this car stereo. The decoder is plug and play, and you don’t need to modify or cut any wire of your car due to its easy installation. After installation, you can enjoy the high-quality sound in your car all the way. On the hand other, this car stereo is plug and play and easy to install if you don’t have a Bose system in your car.

 

It is built with a large7 inch 1024*600 HD multi-touch digital capacitive LCD screen, a RK3066 1.6 GHz Cortex A9 Dual-core CPU and a Samsung DDR3 1GB RAM and 8G Nand flash, providing high configurations for you to enjoy better operation.

 

This unit can also get connected with WIFI wireless hotspots and support optional 3g dongle. You can easily get access to various online entertainment such as video, TV, movie, music, radio and online communication including YouTube, Twitter, MSN, Facebook and other services.

 

The 3D GPS navigation can provide lane assist, 3D street view, landmark display, turn-by-turn direction and voice cues for you to find your way to a variety of locations. To pair with your enabled mobile phone via the wireless Bluetooth technology, you can also make and receive hands-free calls and enjoy music streaming on all the trips.

 

This car stereo can also function as an amazing DVD player to support HD 1080P video and a wide range of multimedia formats like DVD/DIVX/MP4/MP3/MP2/VCD etc. Just take this wonderful Mercedes Benz GL Class X164 car stereo right now and enjoy a totally exciting experience driving!

 

 

 

 

Simple 5 step to install a 2007-2010 Nissan QASHQAI Radio

Posted on by

First show you a picture of Seicane 2007-2010 Nissan QASHQAI Radio.

2007-2010 Nissan QASHQAI Radio after installation

2007-2010 Nissan QASHQAI Radio after installation

Do you think it’s awesome? If you want to get a new aftermarket radio to replace your factory radio? But some of you think it’s too trouble to remve the factory radio, or some of you have already tried and failed. To be honest, This Nissan QASHQAI radio is easy remove. The new aftermarket radio in waving to you. And what are you waiting for? Here is professional instruction.

 

Some safety notes

1)Please apply the parking brake before the upgrade.

2)Please disconnect the negative cable on the vehicle battery to ensure security.

3)Please prepare tools for the upgrade. A lever and a screwdriver are needed.

4)Please protect the front seats and trim panel during upgrade.

2007-2010 Nissan QASHQAI Radio installation

1)Disconnect the cable running to the negative battery terminal by loosening the nut on the cable clamp and pulling the cable off the negative terminal.

2)Remove the two screws above the Nissan QASHQAI Radio opening with the head screwdriver.

2007-2010 Nissan QASHQAI Radio installation step 1

2007-2010 Nissan QASHQAI Radio installation step 1

3)Pull the radio trim panel off. You may need to wedge a flat tip screwdriver under the trim and pry up on it to remove the trim. Use a clean rag to protect the trim from being accidentally scratched while prying up on the trim.

2007-2010 Nissan QASHQAI Radio installation step 2

2007-2010 Nissan QASHQAI Radio installation step 2

4)Remove the four screws holding the radio in place using a head screwdriver and pull the radio out.

2007-2010 Nissan QASHQAI Radio installation step 3

2007-2010 Nissan QASHQAI Radio installation step 3

5)Disconnect the radio antenna in the back of the radio and unplug the electrical plugs running to the back of the radio.

2007-2010 Nissan QASHQAI Radio installation step 4

2007-2010 Nissan QASHQAI Radio installation step 4

 

Of course,there may have other situations.You’d better ask some professionals for help at the first time.If the steps of radio ramoval are too difficult to you,you should go to a car radio shop to remove your factory radio.

 

Some of you may haven’t got a suitable aftermarket radio for your Nissan Frontier.Here is a good aftermarket car radio I want to share with you.It has many useful functions,such as bluetooth,3D navigation,car DVR and so on.More about this unit:

http://www.seicane.com/android-radio-gps-navigation-system-for-2007-2010-nissan-qashqai-with-wifi-bluetooth-mirror-link-hd-1024-600-touch-screen-dvr-tv-obd2-3g-usb-sd-ipod-rearview-camera-1080p-video-s166226

You can dial, answer, reject and mute calls without taking your hands off the steering wheel. And you can perform Google search on the road with quick search box, play online games, watch videos, download online data and check emails by connecting to any WiFi hotspot in range or 3g internet, download any applications in the android market for access to games, Skype, MSN, YouTube, twitter, E-Book, Gmail etc and so on. Let’s check the great function in it.

So,new aftermarket Nissan QASHQAI Radio is here waiting for you, good luck!

2000 2001-2006 Toyota Corolla EX Radio installation

Posted on by

Here is the picture of Seicane 2000-2006 Toyota Corolla EX Radio after installation.

2000-2006 TOYOTA COROLLA EX Radio after installation

2000-2006 TOYOTA COROLLA EX Radio after installation

This Android 4.4.4 GPS Radio Car Audio System is ideal for upgrading your car’s factor radio of 2000 2001 2002 2003 2004 2005 2006 TOYOTA COROLLA EX. It has many advanced features, such as built-in gps navigation, Bluetooth, FM/AM radio, USB connection, and so on. A backup camera is also supported to provide assistance when you are reversing. Easy to install, this headunit is just plug and play. To check the compatibility of the unit with your car, please send a picture of your dashboard and the year and the model of your car to sales@seicane.com.

If you have the same dashboard with the picture shows, you can follow the instructions below.

 

Precautions before installation:

1.Before you begin any work, remember to disconnect negative power cable to avoid danger

2.Please turn off your car series include the radio unit and park your car well.

3.Before connecting, please make sure the ignition is off to avoid short circuit and connect the yellow and res cable at last.

 

2000-2006 Toyota Corolla EX Radio installation

1)First remove two trim panels at each side of center console and set it aside.

2000-2006 TOYOTA COROLLA EX Radio installation step 1

2000-2006 TOYOTA COROLLA EX Radio installation step 1

2)Remove the top panel and set it aside.

2000-2006 TOYOTA COROLLA EX Radio installation step 2

2000-2006 TOYOTA COROLLA EX Radio installation step 2

3)Remove 4 screws holding the unit with a Phillips screwdriver.

2000-2006 TOYOTA COROLLA EX Radio installation step 3

2000-2006 TOYOTA COROLLA EX Radio installation step 3

4)Gently take out the panel on the radio interface.

2000-2006 TOYOTA COROLLA EX Radio installation step 4

2000-2006 TOYOTA COROLLA EX Radio installation step 4

5)Then take out the radio and disconnect cables at back of it.

2000-2006 TOYOTA COROLLA EX Radio installation step 5

2000-2006 TOYOTA COROLLA EX Radio installation step 5

6)Connect the cables on the new head unit as the user manual shows and place them well.

7)Put the new head unit into the dash.

8)Turn on the new head unit and have a comprehensive check if it works well.

9)Install 4 screws back to their original position.

10)Check whether the unit is working without problem.

11)If everything is OK, make trim panel back on your new Seicane radio.

 

By the way, you should make sure whether the aftermarket radio fits your car before installation, and here is a good aftermarket radio of Seicane which fits Toyota Corolla EX well:

http://www.seicane.com/seicane-s126002-2000-2006-toyota-corolla-ex-android-4-4-4-gps-radio-car-audio-system-with-800-480-touch-screen-3g-wifi-dvd-player-bluetooth-obd2-mirror-link-steering-wheel-control-backup-camera-1080p

 

This Seicane Toyota Corolla EX Radio can be a good choice for you. It has intelligent pure android 4.4.4 operation system and 6.2 inch HD 800*480 multi-touch screen.

This in dash car DVD player features a useful and latest GPS system and the advanced bluetooth technology for easy wireless pairing with enabled devices to make or receive hands-free calls and enjoy streaming music. The ability of USB and an SD card slot are also provided for you for more portable devices to let you have an enjoyable experience while driving. The installation is quite easy and it is just plug and play. No wire needs to be modified or cut for the simple installation.

So, have a good time with your new Toyota Corolla EX Radio!

How to install a 2005 Alfa Romeo 159 Radio with 9 steps

Posted on by

Alfa Romeo 159 is becoming a hot choice for most people. But the factory radio of it can not meet all our needs. If you want to have more great functions, the best solution is install a new aftermarket radio. Now you can read this essay patiently. Here are some professional instructions of 2005 Alfa Romeo 159 Radio installation. But if you didn’t install a radio before, you’d better do it with the help of a professional technician in case of some irreparable damage is being made.

First show you the picture of Seicane 2005 Alfa Romeo 159 Radio after installation.

2005 Alfa Romeo 159 Radio after installation

2005 Alfa Romeo 159 Radio after installation

If you have the same dashboard with the picture shows, you can follow the instructions below.

 

Precautions before installation:

1.Before you begin any work, remember to disconnect negative power cable to avoid danger

2.Please turn off your car series include the radio unit and park your car well.

3.Before connecting, please make sure the ignition is off to avoid short circuit and connect the yellow and res cable at last.

 

2005 Alfa Romeo 159 Radio installation

1)First set a radio removal tool into the radio.

2005 Alfa Romeo 159 Radio installation step 1

2005 Alfa Romeo 159 Radio installation step 1

2)Then set another radio removal tool into the radio.

2005 Alfa Romeo 159 Radio installation step 2

2005 Alfa Romeo 159 Radio installation step 2

3)Pull out the radio slowly.

2005 Alfa Romeo 159 Radio installation step 3

2005 Alfa Romeo 159 Radio installation step 3

4) Then disconnect cables at back of the radio.

2005 Alfa Romeo 159 Radio installation step 4

2005 Alfa Romeo 159 Radio installation step 4

5) Connect the cables on the new head unit as the user manual shows and place them well.

6)Put the new head unit into the dash.

7)Turn on the new head unit and have a comprehensive check if it works well.

8)Check whether the unit is working without problem.

9)If everything is OK, then make trim panel back on your new Seicane radio.

 

By the way, you should make sure whether the aftermarket radio fits your car before installation, and here is a good aftermarket radio of Seicane which fits Alfa Romeo 159 well:

http://www.seicane.com/seicane-s126007-2005-onwards-alfa-romeo-159-radio-replacement-with-android-4-4-4-hd-800-480-touch-screen-dvd-player-blutooth-car-system-3g-wifi-mirror-link-obd2-steering-wheel-control-rearview-camera-1080p-video

This Seicane Alfa Romeo 159 Radio can be a good choice for you. It has intelligent pure android 4.4.4 operation system and 6.2 inch HD 800*480 multi-touch screen.

You can perform Google search on the road with quick search box, play online games, watch videos, download online data and check emails by connecting to any WiFi hotspot in range or 3g internet, download any applications in the android market for access to games, Skype, MSN, YouTube, twitter, E-Book, Gmail etc. And it’s your perfect road companion. What’s more, this multimedia player has a touch screen display that can be used with reverse cameras to make parking easier.

You won’t get lost and even can easily reach those hard-to-find locations under the guidance of the built-in GPS system. The bluetooth functionality allows you to keep your hands on the steering wheel control and your eyes on the road ahead for a safer driving by pairing your mobile phone with this unit. In addition, the most exciting thing is that you can enjoy your favorite songs and movies while traveling.

 

Wish you can learn something from this essay, have fun with your new Alfa Romeo 159 Radio.

How to upgrade your 2006 2007-2011 KIA sedona Radio to GPS touch screen dvd player

Posted on by

Do you want to have a better in-car environment? Thesedays, more and more KIA sedona owners upgrade their factory radio to touch screen DVD player. Aftermarket KIA sedona Radio is a awesome choice for most of us. Here are some professional instructions of KIA sedona Radio installation. But if you didn’t install a radio before, you’d better do it with the help of a professional technician in case of some irreparable damage is being made.

 

Before installation, look at the picture of Seicane 2006-2011 KIA sedona Radio after installation.

2006-2011 Kia sedona Radio after installation

2006-2011 Kia sedona Radio after installation

If you have the same dashboard with the picture shows, you can follow the instructions below.

 

Precautions before installation:

1.Before you begin any work, remember to disconnect negative power cable to avoid danger

2.Please turn off your car series include the radio unit and park your car well.

3.Before connecting, please make sure the ignition is off to avoid short circuit and connect the yellow and res cable at last.

 

2006-2011 KIA sedona Radio installation

1)Pry off the trim panel with a pry tool.

2006-2011 Kia sedona Radio installation step 1

2006-2011 Kia sedona Radio installation step 1

2)Remove the trim panel and disconnect cables at the back of it.

2006-2011 Kia sedona Radio installation step 2

2006-2011 Kia sedona Radio installation step 2

3)Remove 4 screws holding the unit with a Phillips screwdriver.

2006-2011 Kia sedona Radio installation step 3

2006-2011 Kia sedona Radio installation step 3

4)Gently take out factory radio.

2006-2011 Kia sedona Radio installation step 4

2006-2011 Kia sedona Radio installation step 4

5)Then disconnect cables at back of the radio.

2006-2011 Kia sedona Radio installation step 5

2006-2011 Kia sedona Radio installation step 5

6)Connect the cables on the new head unit as the user manual shows and place them well.

7)Put the new head unit into the dash.

8)Turn on the new head unit and have a comprehensive check if it works well.

9)Install 4 screws back to their original position.

10)Check whether the unit is working without problem.

11)If everything is OK, firm removed screws that are put aside, then make trim panel back on your new Seicane radio.

 

By the way, you should make sure whether the aftermarket radio fits your car before installation, and here is a good aftermarket radio of Seicane which fits KIA sedona well:

http://www.seicane.com/seicane-s127678-android-4-4-4-2006-2011-kia-sedona-carnival-radio-gps-navigation-car-stereo-dvd-player-head-unit-800-480-touch-screen-bluetooth-music-wifi-3g-obd2-mirror-link-rearview-camera-video-aux-dvr

This Seicane KIA sedona Radio can be a good choice for you. It has intelligent pure android 4.4.4 operation system and 6.2 inch HD 800*480 multi-touch screen.

You can perform Google search on the road with quick search box, play online games, watch videos, download online data and check emails by connecting to any WiFi hotspot in range or 3g internet, download any applications in the android market for access to games, Skype, MSN, YouTube, twitter, E-Book, Gmail etc. And it’s your perfect road companion. What’s more, this multimedia player has a touch screen display that can be used with reverse cameras to make parking easier.

So, what are you waiting for? Just upgrade your KIA sedona Radio by yourselves!

How to install a 2007-2013 Jeep Wrangler Unlimited Radio with 10 steps

Posted on by

Nowadays, 2008-2011 Jeep Wrangler Unlimited become more and more popular. Maybe you are one of Jeep Wrangler Unlimited owners. Do you want to improve your in-car environment? And do you want to improve your driving quality? If you say yes, then you can just install a new aftermarket Jeep Wrangler Unlimited Radio. The installation is quite easy, and most of the aftermarket radio are just plug and play. To help you better install, the following is the detailed instructions of the installation of a 2008-2011 Jeep Wrangler Unlimited Radio for you as a reference.

Here is the Seicane 2007-2013 Jeep Wrangler Unlimited Radio after installation.

2007-2013 Jeep Wrangler Unlimited Radio after installation

2007-2013 Jeep Wrangler Unlimited Radio after installation

If you have the same dashboard with the picture shows, you can follow the instructions below.

By the way, you should make sure whether the aftermarket radio fits your car before installation, and here is a good aftermarket radio of Seicane which fits Jeep Wrangler Unlimited well:

http://www.seicane.com/seicane-s126061-in-dash-2007-2013-jeep-wrangler-unlimited-radio-upgrade-with-android-4-4-4-dvd-player-bluetooth-gps-navigation-car-audio-system-800-480-touch-screen-wifi-3g-mirror-link-obd2-backup-camera-dvr-aux

This Seicane Jeep Wangler Unlimited Radio can be a good choice for you. It has intelligent pure android 4.4.4 operation system and 6.2 inch HD 800*480 multi-touch screen.

You can perform Google search on the road with quick search box, play online games, watch videos, download online data and check emails by connecting to any WiFi hotspot in range or 3g internet, download any applications in the android market for access to games, Skype, MSN, YouTube, twitter, E-Book, Gmail etc. And it is your perfect road companion.

 

2007-2013 Jeep Wangler Unlimited Radio installation

1)Pry the trim panel with a pry tool.

2007-2013 Jeep Wrangler Unlimited Radio installation step 1

2007-2013 Jeep Wrangler Unlimited Radio installation step 1

2)Remove the trim panel and disconnect cables at the back of it.

2007-2013 Jeep Wrangler Unlimited Radio installation step 2

2007-2013 Jeep Wrangler Unlimited Radio installation step 2

3)Remove 4 screws holding the unit with a screw removal tool.

2007-2013 Jeep Wrangler Unlimited Radio installation step 3

2007-2013 Jeep Wrangler Unlimited Radio installation step 3

4)Gently take out factory radio and disconnect cables at back of it.

2007-2013 Jeep Wrangler Unlimited Radio installation step 4

2007-2013 Jeep Wrangler Unlimited Radio installation step 4

5)Connect the cables on the new head unit as the user manual shows and place them well.

2007-2013 Jeep Wrangler Unlimited Radio installation step 5-1

2007-2013 Jeep Wrangler Unlimited Radio installation step 5-1

2007-2013 Jeep Wrangler Unlimited Radio installation step 5-2

2007-2013 Jeep Wrangler Unlimited Radio installation step 5-2

2007-2013 Jeep Wrangler Unlimited Radio installation step 5-3

2007-2013 Jeep Wrangler Unlimited Radio installation step 5-3

6)Put the new head unit into the dash.

2007-2013 Jeep Wrangler Unlimited Radio installation step 6

2007-2013 Jeep Wrangler Unlimited Radio installation step 6

7)Turn on the new head unit and have a comprehensive check if it works well.

8)Install 4 screws back to their original position.

9)Check whether the unit is working without problem.

10)If everything is OK, firm removed screws that are put aside, then make trim panel back on your new Seicane Jeep Wrangler Unlimited Radio.

Precautions before installation

1.Before you begin any work, remember to disconnect negative power cable to avoid danger.

2.Please turn off your car series include the radio unit and park your car well.

3.Before connecting, please make sure the ignition is off to avoid short circuit and connect the yellow and res cable at last.

How to install a 2004 2005-2009 KIA sportage Radio with 3D map touch screen

Posted on by

Here is the Seicane 2004-2009 KIA sportage Radio after installation.

2004-2009 Kia sportage Radio after installation

2004-2009 Kia sportage Radio after installation

Do you want to install a new aftermarket radio on your car? Perhaps you installed radio on your KIA sportage but failed. Don’t worry, the installation of a new radio is not so complicated that you can do it by yourself if you have the detailed instructions. But if you didn’t install a radio before, you’d better do it with the help of a professional technician in case of some irreparable damage is being made. The following is the detailed instructions about how to install a 2004-2009 KIA sportage Radio in a correct way.

If you have the same dashboard with the picture shows, you can follow the instructions below.

 

 

Precautions before installation:

1.Before you begin any work, remember to disconnect negative power cable to avoid danger

2.Please turn off your car series include the radio unit and park your car well.

3.Before connecting, please make sure the ignition is off to avoid short circuit and connect the yellow and res cable at last.

 

2004-2009 KIA sportage Radio installation

1)Pry off the trim panel with a pry tool.

2004-2009 Kia sportage Radio installation step 1

2004-2009 Kia sportage Radio installation step 1

2)Remove the trim panel and disconnect cables at the back of it.

2004-2009 Kia sportage Radio installation step 2

2004-2009 Kia sportage Radio installation step 2

3)Remove 4 screws holding the unit with a Phillips screwdriver.

2004-2009 Kia sportage Radio installation step 3

2004-2009 Kia sportage Radio installation step 3

4)Gently take out factory radio.

2004-2009 Kia sportage Radio installation step 4

2004-2009 Kia sportage Radio installation step 4

5)Then disconnect cables at back of the radio.

2004-2009 Kia sportage Radio installation step 5

2004-2009 Kia sportage Radio installation step 5

6)Connect the cables on the new head unit as the user manual shows and place them well.

7)Put the new head unit into the dash.

8)Turn on the new head unit and have a comprehensive check if it works well.

9)Install 4 screws back to their original position.

10)Check whether the unit is working without problem.

11)If everything is OK, firm removed screws that are put aside, then make trim panel back on your new Seicane radio.

 

By the way, you should make sure whether the aftermarket radio fits your car before installation, and here is a good aftermarket radio of Seicane which fits KIA sportage well:

http://www.seicane.com/seicane-s127678-aftermarket-android-4-4-4-gps-navigation-system-for-2004-2009-kia-sportage-radio-upgrade-with-bluetooth-music-dvd-player-car-stereo-touch-screen-3g-wifi-mirror-link-obd2-steering-wheel-control

This Seicane KIA sportage Radio can be a good choice for you. It has intelligent pure android 4.4.4 operation system and 6.2 inch HD 800*480 multi-touch screen.

You can perform Google search on the road with quick search box, play online games, watch videos, download online data and check emails by connecting to any WiFi hotspot in range or 3g internet, download any applications in the android market for access to games, Skype, MSN, YouTube, twitter, E-Book, Gmail etc. And it’s your perfect road companion. Have a good trip with your KIA sportage!