Specific installation insrtuctions for 2012 2013 Toyota Camry audio system with 3D navigation IPod

You may find that more and more car owners would more likely to install a dvd player by themselves.Does it mean they are all professional for it?I don’t think so for they should have searched right installation guide for Toyota Camry audio system and do according to it.

Today I will show you Specific installation insrtuctions for 2012 2013 Toyota Camry audio system with 3D navigation IPod and you will also have the ability to achieve this goal.

Car radio stereo audio system with BT music IPod of 2012 2013 Toyota Camry

Car radio stereo audio system with BT music IPod of 2012 2013 Toyota Camry

This fact also shows that demands for entertaining life is becoming very large and necessary.But how can we ensure that this one that above image show is just the one we need?Don’t worry,if you find the trim panels of the factory one and new one are almost same,then it is.So you will seek a stereo which can match your car first if you are going to upgrade your car audio system.

Precautions before installation:

1.Please check out the appearance and all functions of the car to make sure that original system is all right before installing the unit

2.Please do not shorten or extened the GPS antenna,for it will arise antenna problem

3.Notice that do not let the GPS antenna winding the steering wheel and shift lever,it can be dangerous

2012 2013 Toyota Camry radio removal and aftermarket audio installation:

1.Gently lever the below trim panel

Gently lever the below trim panel

Gently lever the below trim panel

2.Remove these two screws with a screwdriver as the picture show

Remove these two screws with a screwdriver

Remove these two screws with a screwdriver

3.Remove two screws that beside the white ones

Remove two screws that beside the white ones

Remove two screws that beside the white ones

4.Then you can gently pry the upper dashboard

gently pry the upper dashboard

gently pry the upper dashboard

5.Take  CD player out softly  and disconnect all the cables behind it

Take  CD player out softly

Take CD player out softly

disconnect all the cables behind it

disconnect all the cables behind it

6.CD player after removal

CD radio after removal

CD radio after removal

7.After the removal procedure,connect the cables of new unit to the right places,or you can take instructions as reference to finish this work,or ask someone who knows well to help you

8.Make upper dashboard and fasten four screws back to the unit and make the below dashboard to its original position

Whole process for Toyota Camry audio stereo head unit installation is over here,some of you may still have some doubts about this new unit,then you can visit some websites to gather the exact information,for example:http://www.seicane.com/8-inch-2012-2013-toyota-camry-aurion-eu-au-version-autoradio-dvd-player-tv-tuner-bluetooth-radio-rds-3g-wifi-pop-aux-backup-camera-hd-1080p-mp3-steering-wheel-control-c131.

Precautions when you operate the new unit:

1.Please do not use strong chemicals, cleaners, strong detergent to wipe the head unitr

3.Please use the touch screen pen or your finger to gently operate the unit,without using any other sharp objects, if not it will damage the screen.

3.Please keep the original display well when the staff is dismounting the original radio in order to use the original screw again

 

 

How to install 2007-2013 Toyota Land Cruiser 200 series aftermarket navigation system with radio 3G WIFI

Before we start talk about how to install 2007-2013 Toyota Land Cruiser 200 series aftermarket navigation system with radio 3G WIFI, I would like to let you to see next video and have a general understanding of it first.

Most of you may have the willing to equip your car with the stereo in the video which is very practical.But you should make sure that whether this unit can be installed in your car before at first.

You will make it clear with the help of next picture by comparing the trim panel.And then I will show you detailed installation steps for 2007-2013 Toyota Land Cruiser 200 series navigation system.

New unit after installation,navigation dvd with HD touch screen radio tuner of 2007-2013 Toyota Land Cruiser 200 series

New unit after installation,navigation dvd with HD touch screen radio tuner of 2007-2013 Toyota Land Cruiser 200 series

 

Please have a careful look at your trim panel of the original radio and check it whether looks alike this one’s,or you can ask someone who are professional to help you make this judgement.Finding a suitable car stereo is the basis for your installation.

When you have decided to install the more convenient one,you can take the following steps as references.Honestly speaking,all car radios are largely identical but with minor differences.Therefore knowing how to install car audio systems means that you can install a dvd player by yourself.

I have some advices about safety for you before talking about the installation.

Precautions for safety:

When we are using new car dvd radio, remember that safety is the most important.Please do not stare at or even use the stereo while driving, for it will disperse your attention.

When meeting high humidity atmosphere,for example,raining days, it may not work normally as the humidity may gather on screen. In addition, do not sprinkle any liquid on the unit to maintain high playing quality.The following part is about the removal steps for car’s head unit.

2007-2013 Toyota Land Cruiser head unit removal and installation:

1.Remove the two blots off  both sides of handbrake

Remove the two blots off  both sides of handbrake

Remove the two blots off both sides of handbrake

2.Remove screws with your hand

Remove screws with your hand

Remove screws with your hand

 

3.Remove left and right loosed dashboard after the bolts are taken off

Remove left and right loosed dashboard after the bolts are taken off

Remove left and right loosed dashboard after the bolts are taken off

4.Make the cable between them disconnected

Make the cable between them disconnected

Make the cable between them disconnected

5.Use your hand to take out the screw

Use your hand to take out the screw

Use your hand to take out the screw

6.Get five screws out as the picture show

Get the first screw out

Get the first screw out

Get the second and third screw out

Get the second and third screw out

Get the fourth and fifth screw out

Get the fourth and fifth screw out

7.Remove CD player from the unit

Remove CD player from the unit

Remove CD player from the unit

8.Gently unplugged the cables behind the player

Gently unplugged the cables behind the player

Gently unplugged the cables behind the player

As for the installation,after you have totally removed factory stereo,connect antennas of new unit to right positions,include cables and connectors.You can do it according to the installation instructions from the dealer.

After that, slip the unit into the dash then plug the negative cable to the original wiring harness as the guide show.If you want to know more information about this car dvd,you can visit some websites for help :http://www.seicane.com/9-inch-car-gps-radio-mount-for-2007-2013-toyota-land-cruiser-200-series-with-bluetooth-music-tv-tuner-cd-dvd-player-aux-3g-wifi-dvr-steering-wheel-control-pop-hd-1080p-c182.

Please mind that all wires should be correctly connected and the same to battery installation.After all these,turn on new radio and operate it with a touch screen pen.

Check out all functions of the unit to see whether your installation process is right. If it doesn’t, check the wires connection again or contact with technicians from the dealer for solutions.