2003-2010 VW Touareg radio stereo display replacement

Posted on April 29, 2015 by mutt

Head unit after installation,dvd GPS radio stereo of 2003-2010 VW Touareg.

Head unit after installation,dvd GPS radio stereo of 2003-2010 VW Touareg

A fact shows that people are always seeking for more pleasure from busy life in recent society,for we need to free ourselves especially when we are living rapid-speed life.Many people are more willing to buy a new car because it will bring them much convenience and entertainments.If you are one owner of 2003-2010 VW Touareg,this article will show general steps which is about 2003-2010 VW Touareg radio stereo display replacement.

Before we get to know how to replace original CD player to a new one,we can have a look at above image first and make a comparison between your car stereo with it,and see whether the dashboards of them are alike.If they are in same scale.it shows that this stereo radio can also be installed in your car.

I guess most of you have no idea about how to use this stereo,here is a video for you which will show you detailed operations:

In fact this process is not hard,but easy doesn’t mean that we have no need to attention anything,please turn off all affairs of your car to ensure security.And you need to note whether dvd player enters heat protection mode when your car has operated at very fast speed for a long time or when you feel the temperature of the unit is very high.

If you really decide to install a VW Touareg radio for your beloved car,you can have a good look at the following VW Touareg radio installation guide and operate it step by step.

1.Original car radio of VW Touareg

Original car radio of VW Touareg

2.Make four small levers inserted into the radio gap

Make four small levers inserted into the radio gap

3.Tight them into the gap and then take out CD player by pulling the levers off

Tight them into the gap and then take out CD player by pulling the levers off

4.Use a pry tool as the picture show to release lever and after that you can remove four levers

a pry tool

release lever and after that you can remove four levers

5.Unplug this thick cable

Unplug this thick cable

6.Use a small special screwdriver to release this screw and connect most fine wire to it

Use a small special screwdriver to release this screw and connect most fine wire to it

7.Take inner wire out and get out a blue one and then insert it into white one of new unit,with the other white one plugged into blue one’s original place

Take inner wire out and get out a blue one and then insert it into white one of new unit

with the other white one plugged into blue one’s original place

8.Make it connected to right place,have a tidy for wiring and turn on new radio and check whether all functions can work well

Make it connected to right place

have a tidy for wiring and turn on new radio and check whether all functions can work well

Installation for VW Touareg bluetooth dvd with autoradio gps is finished here.Before you install,you should be careful when you are making cables connection and make sure all antennas must be connected to right positions.

After that, slide the unit into dashboarda and then plug the negative cable to the original wiring harness as the steps show. Open up new unit and check whether all functions in the unit can work well.If it doesn’t,check the wiringconnections again or contact with the technicians from the dealer for help,or you can visit some websites which can help you get a better understanding of new stereo, for example:http://www.seicane.com/all-in-one-gps-radio-stereo-replacement-for-2003-2010-vw-volkswagen-touareg-with-3d-navigation-hd-touch-screen-cd-dvd-player-bluetooth-dvb-t-tv-steering-wheel-control-aux-ipod-iphone-c042.

Installation guide for 2013 Hyundai I30 bluetooth dvd aftermarket sat nav system

Posted on April 27, 2015 by mutt

Head unit after installation,car dvd autoradio gps bluetooth of 2013 Hyundai I30.

Head unit after installation,car dvd autoradio gps bluetooth of 2013 Hyundai I30

I guess you are a owner of 2013 Hyundai I30,but you find that the original car stereo has been behind and can not catch up with recent trend,so you are not very satisfied with it and want to do an upgrade,then it’s a right choice to read this essay.For the installation guide for 2013 Hyundai I30 bluetooth dvd aftermarket sat nav system is the main content of it.

In fact,most of car radios are largely identical but with little differences.Therefore,knowing how to install a stereo of Hyundai I30 will also benefit you on installing head unit on other cars.And just by yourself,you can do most of it without worker’s help.

Most of you will feel excited after right installation,so you’d better attention following tips first to avoid any danger during your driving.

1.When you are driving with a car with new stereo,please do not stare at the DVD player,or even operate it,it can disperse your attention which is very dangerous

2.If your car meeting raining days with high humidity,moisture may gather on unit,and it will probably lead car’s improper work

3.In order to get high playing quality please do not splash liquid on the radio

2013 Hyundai I30 original stereo removal:

1.Get under the silver plastic cover with a rubber tool,after that push it to the side

Get under the silver plastic cover with a rubber tool

2.Take four screws out

Take four screws out

3.Lug the top of the panel towards you.It’s a little hard to release the bottom part,but pull it the same way

Lug the top of the panel towards you

4.Remove the plastic clips carefully with a small screwdriver

Remove the plastic clips carefully with a small screwdriver

plastic clips after removal

5.Get out the front panel and you will see the inner part just as the image show

Get out front panel

you can see the inner part of CD player

6.There are no buttons on the plantation,but the heater of words seat are printed on it

There are no buttons on the plantation,but the heater of words seat are printed on it

2013 Hyundai I30 original bluetooth dvd installation:

7.Connect cables of dvd player to the car

8.Make screws back to their places and firm them

9.Make plastic cover back to the car beside the radio

Making cables connection is a very key step in installation,you need to be very careful when you connect antennas of Hyundai I30 bluetooth to right connectors,and I suggest you to do this according to the installation instructions from the dealer. After that, slide new bluetooth dvd into the dash then connect negative cable to factory wiring harness.

After installation,you can have a small test for it:turn on new radio and operate it to check out all the functions in the unit.If it doesn’t, check cables connection again or contact with technicians from the dealer for answers.

For more information about this head unit of Hyundai I30,you can find what you want from the Internet,for example:http://www.seicane.com/2013-hyundai-i30-in-dash-sat-nav-system-lcd-touch-screen-3g-wifi-am-fm-radio-bluetooth-music-dvd-player-tv-ipod-iphone-aux-pop-steering-wheel-control-backup-camera-c156.

And if you want to see more serious kinds of autoradios,you can visit next website:http://www.seicane.com,I know there are a lot of car dvds there.

Upgrade steps for 2008 2009 2010 2011 Toyota Auris radio stereo sound system

Posted on April 25, 2015 by mutt

New unit after installation,aftermarket autoradio stereo with sat nav system of 2008 2009 2010 2011 Toyota Auris.

New unit after installation,aftermarket autoradio stereo with sat nav system of 2008 2009 2010 2011 Toyota Auris

Do you have a Toyota Auris for 2008 2009 2010 2011 and is your car stereo looks like this one?I guess most of you haven’t upgraded it for taking it as a complex thing.But in fact it’s not if you can find right upgraded steps for 2008 2009 2010 2011 Toyota Auris radio stereo sound system.

From the front picture,we can find that this new unit is different from original ones on its outside appearance and functions.Many people choose to replace factory stereo with a new one just for these changes.With rapid development of technology,people can also enjoy its labor work very quickly.

If you think that you are not very familiar with this unit,I advice you to visit following website which has more detailed information for it: http://www.seicane.com/double-din-sat-nav-speaker-upgrade-for-2008-2009-2010-2011-toyota-auris-with-hd-touch-screen-radio-rds-cd-dvd-player-tv-tuner-3g-wifi-aux-ipod-steering-wheel-control-c028.

Searching information about car dvd installation include reading articles which will show you specific steps to achieve it,so it’s right for you to have a look at it,no matter what kind of condition you are in,it will benefit your life more or less.

There are about 7 steps to accomplish Toyota Auris radio upgrade,and this process is mainly about removal steps.Because if you finished removal affairs it means that you have finished most of the installation.The removal generally can be divided into four parts,including remove trim panel,fasten screws,remove dashboard and take out the CD player.

2008 2009 2010 2011 Toyota Auris car stereo removal and installation:

1.Pry and release side panels from higher center with a panel removal tool

Pry and release side panels from higher center with a panel removal tool

If you feel a little difficult,you can open up the left side console to achieve it

pry left side panel to help remove whold side panel

2.Take four screws out which distributed two on each side where the consoles were removed

Take four screws out which distributed two on each side where the consoles were removed

3.You can gently take the dashboard out but also easily after four screws are taken down

gently take the dashboard out but also easily after four screws are taken down

4.Then take out factory cd radio

take out factory cd radio

5.Gently disconnect all wiring one by one

Gently disconnect all wiring one by one

6.Make connection on the cables between new unit and wiring of the car, then install it into the space right for it

7.Put the dashboard in original place and firm screws that were set aside

It won’t take you much time to finish the installation of Toyota Auris nav system.Please be gentle to those things which are taken down by you,such as panels and you also set the screws at a visible place for easy to find.

If you hold that the aftermarket autoradio seems to be not very suitable for your car,you need to find more stereos and make a comparison,maybe http://www.seicane.com can be a not bad choice for you.Because sometime we know if this dvd radio is just the one I want when I see it at first sight.

I believe that your life especially when you are on a journey will be more colorful with a such car dvd player,and the gps nav system is one of the most popular functions.But before you enjoyed all these,keep your safety in mind when you are upgrading your car radio.

Warm tips:

The features of new head unit are good indeed,but do not let them instead of your attention or vigor,or it can be very dangerous.You can enjoy the beautiful music or sound when you are busy driving.

How to mount 2013 Toyota RAV4 aftermarket navigation system

Posted on April 23, 2015 by mutt

New dvd radio after upgrade,autoradio with navigation system of 2013 Toyota RAV4

Many things are upgrading at a surprising speed with faster and faster development of technology.This is just where the market is,because human begins need more advanced products,they are seeking for this kind of life style.Then how about your 2013 Toyota RAV4 car radio update?I will show you how to mount 2013 Toyota RAV4 aftermarket navigation system in this article.

This above picture is a suitable one which can match your Toyota RAV4,do you feel familiar with it for you have seen a similar one when you are going car market.Yes,this is the aftermarket car dvd with touch screen and bluetooth music.

Many of you are thinking about the upgrading affair but don’t know what to do with the car radio.Don’t worry,you’ll see specific installation steps for Toyota RAV4 radio in latter part.But please remember to remove the negative power cable from the battery before you begin your installation as the next picture shows.

2013 Toyota RAV4 cd player removal:

1.Use an automotive tool remove the upper dashboard trim panel,set the panel aside once removed

Use an automotive tool remove the upper dashboard trim panel,set the panel aside once removed

2.Prize the air conditioning vents gently which are on the left and right-hand sides of the factory touch screen unit away from the dashboard

prize the air conditioning vent gently on the right-hand sides of the factory touch careen unit away from the dashboard

prize the air conditioning vent gently on the left-hand side of the factory touch careen unit away from the dashboard

3.Prize the clock display gently and hazard lamp panel away from the trim panel and set it to the side

Prize the clock display gently and hazard lamp panel away from the trim panel and set it to the side

4.Take four retaining screws attaching the factory touch screen unit to the dashboard out

Take four retaining screws attaching the factory touch screen unit to the dashboard out

5.Softly remove the touch screen unit from the panel and lean it forward to gain access to the wiring harnesses on the reverse side

Softly remove the touch screen unit from the panel and lean it forward to gain access to the wiring harnesses on the reverse side

6.Unplug the touch screen by pulling off the individual harnesses

Unplug the touch screen by pulling off the individual harnesses

7.Dashboard which is totally removed

Dashboard which is totally removed

2013 Toyota RAV4 dvd player installation:

Work for removal part has finished until here,in fact removal is the main part of upgrading car radio.If you have a clear idea about removal affairs,the next Toyota RAV4 aftermarket navigation installation will not be a hard thing to you.

What you should do can be divided into three parts:make connections with all cables,install new machine and install other parts back to their primary places.

If you feel a little complex to do the connection or other things,you can scan some helpful websites which will give you correct guide,for example:http://www.seicane.com/all-in-one-touch-screen-radio-stereo-for-2013-toyota-rav4-with-3g-wifi-dvd-player-bluetooth-music-tv-tuner-ipod-aux-steering-wheel-control-c247 or you can ask people who knows better about this aspect.

Making sure your security is actually the most important no matter how entertaining that reaching this upgrade goal is.So please having a better understanding about the upgrade as much as possible and making adequate preparations as you can before any work.

Precautions after installation:

1.Please try to make the unit away from heat sources,such as heating,heat or have other things,or it may cause damage to it

2.Please do not let this machine being exposed to rain or moisture in the environment(as when rain or car washing) to avoid the internal machinery of the short circuit caused some danger

3.Before you clean the head unit,you have to shut down power cables and then wipe panel.Without using volatile chemicals to clean trim panel

2002-2009 Mercedes E Class W211 E200 E220 E230 CD radio sound system removal

Posted on April 22, 2015 by mutt

Many people have the mind to upgrade their car stereos to catch up modern trend and enjoy more comfortable driving time at the same time.But there are always some problems that confused them.Such as what kind of stereo I should choose which is surely suitable for me,and what’s 2002-2009 Mercedes W211 E200 E220 E230 CD radio sound system removal about?

Today if you are the owner of this Mercedes series oweners,and you are recently in this above situation,then your problems will be solved here.And before that,we can have a look at following picture first:it’s a new unit after installation,stereo autoradio with gps 3G wifi of 2002-2009 Mercedes E Class W211.

new unit after installation,stereo autoradio with gps 3G wifi of 2002-2009 Mercedes E Class W211

We can have a general idea about the new radio from this picture and you can make a comparison between your stereo trim panel with this one’s.If you find that it’s alike,then this is the one you are looking for.And want to know more about this autoradio?Ok,here is a video for you,there is introduction of new functions in it:

After you have a general understanding of it,and the first problem choosing a suitable stereo has been solved,next we will continue to help you deal with following things.Installing your new bought car dvd is the next main thing and you can do it by yourself if you believe yourself and gather right installation guide and then do as it show.

2002-2009 Mercedes E Class W211 stereo removal and installation:

1.Primary dashboard

Primary dashboard

2.Fasten the decoration panel with a pry tool and remove the cigarette lighter

Fasten the decoration panel with a pry tool and remove the cigarette lighter

3.Under the 6-disc CD changer,get out two screws and take out the CD changer

Under the 6-disc CD changer,get out two screws and take out the CD changer

4.Pull out the two screws marked with red arrows and get out the CD player

Pull out the two screws marked with red arrows and get out the CD player

5.This is the connected cables package

This is the connected cables package

6.Let out the baffle-plate under the assistant seat,plug the CAN-HCAN-L cable(green)③with the CAN-BUS socket market in the picture

Let out the baffle-plate under the assistant seat,plug the CAN-HCAN-L cable(green)③with the CAN-BUS socket market in the picture

7.Lever the decoration panel beside the driver’s seat,its change fuse is from 5A to 10A

Lever the decoration panel beside the driver’s seat,its change fuse is from 5A to 10A

8.To fasten the car pc in the left of the trunk,move out the screws

To fasten the car pc in the left of the trunk,move out the screws

9.Find out the amplifier in the left of the trunk and get out the four screws marked with red arrows

Find out the amplifier in the left of the trunk and get out the four screws marked with red arrows

10.Take out car amplifier

Take out car amplifier

11.Plug the speaker cable with the speaker socket②

Plug the speaker cable with the speaker socket②

With these detailed introduction on how to remove Mercedes W211 CD radio and install a dvd player,and help of some other messages, installing work can’t be a difficult thing to everyone.

Your new stereo will surely make your usual life more pleasant with good mount and maintance.The basis is that you are sure the new autoradio gps has been installed very well and if you hope that your nav system can be used longer,I advise you to install the unit according to the above correct process step by step.

Some people are curious about why appearing so many problems during the removal?Don’t worry,it’s normal and if you can gather right information and behave according to the guidance,nothing will disturb you.And you can surf Internet for information,for example:http://www.seicane.com/all-in-one-sat-navi-audio-system-for-mercedes-benz-e-class-w211-with-dvd-bluetooth-built-in-3g-wifi-wince-system-3d-map-support-anti-shock-c090.

Precautions after installation:

1.When you are listening disc and your car is running on very bumpy road,on that case it can damage the pick up

2.If you find the car sound system is operated extremely,such as operated with very fast speed for a long time,or the temperature is over 70 degrees,the head unit will enter heat protection mode,the volume will be lower automatically,this is normal to happen and you need to pay more attention at this kind of time

How to upgrade 2014 Jeep Grand Cherokee head unit audio system

Posted on April 15, 2015 by mutt

Do you have a car of 2014 Jeep Grand Cherokee?If your answer is yes,then you may have interest in reading this article for the main content of it is about how to upgrade 2014 Jeep Grand Cherokee head unit audio system.

There are more and more people begin to upgrade car stereos,just like we are changing our cellular phones very rapidly for the old one can’t catch up with recent trend.It’s not very precise to original car stereo,but principles of them are same.

Here is a head unit car stereo with navigation audio system of 2014 Jeep Grand Cherokee,it can be installed in the car because after factory one has been removed,the empty space can just let new player into it.

head unit car stereo with navigation audio system of 2014 Jeep Grand Cherokee

This is a method to see whether it matches your car,in other words,it’s not only produced for 2014 Jeep Grand Cherokee,but also fit for other certain cars.No matter what result is it,grasping how whole stereo installation is can not be a bad thing.We will see detailed steps for it in next part.

2014 Jeep Grand Cherokee radio removal and installation:

1.Use a pry tool,prize lower button controls to release and remove it

Use a pry tool,prize lower button controls to release and remove it

2.Disconnect cables behind it,you can use a tool help you if it is very tight,remove button controls and put is aside

Disconnect cables behind it,you can use a tool help you if it is very tight

3.Remove 2 screws ,which has one on each side

Remove 2 screws ,which has one on each side

4.Gently pry edges around trim panel with a lever,release and remove it

Gently pry edges around trim panel with a lever,release and remove it

5.Remove 4 screws beside CD radio,which has two on each side

Remove 4 screws beside CD radio,which has two on each side

6.Take out factory stereo and disconnect cables behind it

Take out factory stereo and disconnect cables behind it

This is how to remove car stereo and next we will learn how to install Jeep Grand Cherokee head unit.If you want to know more about new stereo,you can surf the Internet for help,for example you can visit this website which has a lot of specific information:http://www.seicane.com/digital-touch-screen-stereo-upgrade-gps-navigation-2014-jeep-grand-cherokee-with-dvd-bluetooth-tv-ipod-3g-wifi-aux-c349.

In fact installation can be easier than front removal part for that what you need to do is mainly to make connections and install the unit,many things is very clear after you have done removal affairs.

But it doesn’t mean that you can do it unceremoniously,like connecting connectors is a very key affair.Therefore please be careful when you are dealing with those wires,you need to make sure that no one is left and all of them are correctly connected.

After this,you can then gently install new radio into the space.If you feel a little crowd,you’d better tidy well wiring first.With gps nav system installed,you can turn on new unit and check if your installation work are right.There won’t be any big problems that are difficult to solve if you are serious enough to every operation.

Asking someone else to help you is a wise choice,because him or her can pass something you are not convenient to you or remind you some details which is forgot by you but very necessary.Or you can also ask people who are good at this field,maybe this way can be faster to solve troubles.

Precautions after installation:

1.Please don’t be too excited after your installation,remember keeping you safe can only enjoy more entertainments,so do not stare at it when you are driving

2.Please do not use any chemicals wash it,neither other kind of cleaning products

3.When you are driving on a heavy rainy day,you should pay more attention to touch screen,because moisture may gather on it and cause damage to the machine

4.In order to make your upgraded radio can be used longer,please change the exhausted batteries in time

How to install 2008 2009 2010 2011 Jeep Grand Cherokee aftermarket sat nav system

Posted on April 14, 2015 by mutt

Here is an image for car stereo autoradio after replacement, aftermarket sat nav system with touch screen of 2008 2009 2010 2011 Jeep Grand Cherokee.If you have a car of this kind,you may be more curious about its conditions.

car stereo autoradio after replacement, aftermarket sat nav system with touch screen of 2008 2009 2010 2011 Jeep Grand Cherokee

So have you thought about this question:how to install 2008 2009 2010 2011 Jeep Grand Cherokee aftermarket sat nav system?Many people hold that there is no need to do it himself and it’s of course professional person’s staff.However there are also a large number of people have carried it out themselves.Whatever,learning more about it can not be a bad thing and acknowledging this can also help you understand better of your car.I heard that most car owners are car investigators.

There are some notes for you to pay attention to before your begin your installation.

Precautions before removal and installation:

1.Please finish all parking affairs of car to make sure security during next procedure

2.Remember unplug negative battery cable before removal,or it can be very dangerous

3.You’d better find a person to help you for the space of car is limited and solve problems more easily

Now we go to learn about how to remove original CD radio and install Jeep Grand Cherokee aftermarket sat nav system.

2008 2009 2010 2011 Jeep Grand Cherokee radio removal:

1.Original dashboard of Jeep Commander

Original dashboard of Jeep Commander

2.Pry the trim panel with a lever to release it

Pry the trim panel with a lever to release it

3.Pull out trim panel and disconnect connectors between panel and car

Pull out trim panel and disconnect connectors between panel and car

4.Use a screw removal tool to take out 4 screws,and 2 screws on each side

Use a screw removal tool to take out 4 screws,and 2 screws on each side

5.Remove factory stereo gently and disconnect cables behind it

Remove factory stereo gently and disconnect cables behind it

Removing factory stereo is finished with above 6 steps,and you will find that it’s simple to do it when you have prepared removal tools and do it as right guide.And there are still about 3 steps to accomplish it.

Firstly,you should connect all wires include antennas,cables and connectors,do it step by step as following pictures show

connect connectors,antennas and cables

connect connectors,antennas and cables 2

connect connectors,antennas and cables 3

Secondly, you can gently install the unit into right place,and for the space for stereo and wires is limited therefore you’d better have a tidy for the wiring

gently install the unit into right place

You see,actually the most important thing of installation has finished.But I think you need to check it again if you are not very sure about it.Because if you don’t and one of connectors is wrong connection,the stereo won’t work at last and you have to remove the unit and make connections once again,that will waste of time and vigor.

At last,what you should do is turn on stereo and test its functions.If everything is all right,then you can screw those 4 screws and make panel covered on new autoradio.

There is an exact video for you to study how to use new head unit of 2008 2009 2010 2011 Jeep Grand Cherokee,it will show you right use ways of this unit:

For more exact things about this stereo,you can visit some websites to seek what you want,for example:http://www.seicane.com/oem-gps-navigation-stereo-remove-for-2008-2009-2010-2011-jeep-grand-cherokee-with-am-fm-radio-rds-bluetooth-tv-tuner-cd-dvd-player-hd-1080p-c202.

If you are also interested in Jeep Commander radio installation,I have also written an article for it,you can get in the link and have a look at it.

Installation guide for 2009-2012 OPEL Antara gps radio with touch screen auto A/V

Posted on April 11, 2015 by mutt

Have you ever seen this unit:car stereo after upgrade,aftermarket oem gps sat nav with audio system usb of 2009-2012 OPEL Antara?

car stereo after upgrade,aftermarket oem gps sat nav with audio system usb of 2009-2012 OPEL Antara

If your OPEL Antara hasn’t installed a new radio,you can see its panel around the CD player to see whether this stereo can be mounted in.On the contrary,you still need to look for another matched one.For suitable car owners,it may be right to read this article because installation guide for 2009-2012 OPEL Antara gps radio with touch screen auto A/V will be shown in this essay.

Many people hold that installing car dvd should be done by professional person.But facts show a lot of normal drivers also do it by themselves.Therefore it’s not a very difficult thing when you have correct installation instructions.

Please accomplish all your car parking series and disconnect battery cables before you start up your work,after that we begin to figure out the specific installation steps for OPEL Antara gps.

2009-2012 OPEL Antara head unit removal and installation:

1.You will find four small holes on the unit if you watch very closely,make two removal tools inserted into the holes

make two removal tools inserted into the holes

2.Remove the stereo by bending two tools a little and pulling out the stereo at the same time

remove the stereo by bending two tools a little and pulling out the stereo at the same time

3.Disconnect cables between them

disconnect cables between them

4.Take out the screw and tidy some wires to inner place

take out the screw and tidy some wires to inner place

5.Lever top position of the trim panel with a pry tool,to release and remove it

lever top position of the trim panel with a pry tool,to release and remove it

6.When you remove the panel,you will find some of cables are also taken out.Then you plug antennas like this:

plug antennas and interfaces1

plug antennas and interfaces2

7.Pull out the side panel a little by using a screwdriver,then take out lower side panel in front of file

pull out the side panel a little by using a screwdriver

take out lower side panel in front of file

8.Make red long line inserted down through the side panel and up through removed panel in front of file,then firm the side panel

make red long line inserted down through the side panel and up through removed panel in front of file

9.Sort cables and interfaces as the picture show,tidy all of them to right space

sort cables and interfaces as the picture show

10.Connect the red cable to right position

connect the red cable to right position

11.Connect red cable with removed small panel in front of file and reinstall it

connect red cable with removed small panel in front of file and reinstall it

12.Connection for cables and interfaces between new unit and the car

connection for cables and interfaces1

connection for cables and interfaces2

13.Then connect the two outside cables to back of new unit,install new radio into it,and cover removed panel on the dvd player

After you have finished removing the original CD player and mounting advanced dvd player in your car smoothly,you are very interested in using the new head unit.

There are a lot of useful functions,such as navigation system and bluetooth Ipod Iphone.Even though you are experienced in electronic products,it’s a new thing to you after all.If you operate it directly without any attentions,you may damage the machine or shorten its lifetime.Therefore I advise you to get useful information as much as possible,for example,you can visit the following website about the unit after installation:http://www.seicane.com/all-in-one-multimedia-navigation-system-for-2009-2012-opel-antara-with-gps-radio-tv-bluetooth-ipod-iphone-support-3d-navigation-3g-wifi-dvd-function-c019-1.

GPS nav system will help you relaxer especially when you are driving on a unfamiliar road.But please don’t be too relied on it,you still need to look the way to destination if there is something wrong with it.More importantly,do not stare at the screen most of the time but carefully take care of your surroundings.

2013 2014 2015 Ford F150 stereo audio system removal

Posted on April 10, 2015 by mutt

Here is autoradio after upgrade,head unit dvd gps aftermarket sat nav system of 2013 2014 2015 Ford F150.

autoradio after upgrade,head unit dvd gps aftermarket sat nav system of 2013 2014 2015 Ford F150

We can find that there is a little difference between this one and others:first of all the exterior of it is a special shape while most other stereos are rectangles;It has both touch screen and button controls to operate it.So this unit is not a common radio but a practical one.In addition,this unit matches not only F150,but also F250 F350.Many people want to replace their car autoradios but they have no idea about 2013 2014 2015 Ford F150 stereo audio system removal,in that way you may get what you need from this article,which will show detailed operations about head unit removal for Ford F150.

About this aftermarket radio,you can get some introductions from visiting websites,for example:http://www.seicane.com/head-unit-car-stereo-sat-navi-multimedia-player-for-2013-ford-f150-with-gps-radio-dvd-bluetooth-3g-wifi-support-swc-3-zone-pop-c267 .

Before you start your upgrade,you may need to prepare some tools such as screwdriver,panel removal too and so on.

2013 2014 2015 Ford F150 head unit car stereo removal and installation:

1.Remove the rubber pad at the top of the radio trim panel

remove the rubber pad at the top of the radio trim panel

2.Remove the 2 screws exposed

remove the 2 screws exposed

3.Unclip and pull the side panels containing the a/c vents away from the radio trim panel.Please note that it is not necessary to remove the panels completely

unclip and pull the side panels away from the radio trim panel

4.Unclip and remove the radio trim panel

unclip and remove the radio trim panel

5.Unclip all molex plugs

unclip all molex plugs

6.Remove 4 screws to take out the factory radio

remove 4 screws to take out the factory radio

7.Remove stereo and unplug connectors

remove stereo

unplug connectors

Now the original CD player is removed with the help of right instructions,you can make a comparison between your new bought stereo and the space you will install after you succeed removing primary radio.Why?You need to make sure that it can installed into your car,then you can continue things behind. To be honest,installing steps can be easier than removing Ford F150 stereo especially when you have done the latter.The most important thing maybe connecting the cables,interfaces between them,and you can carefully do it according to installation instructions.Next,make all removed objects back to firm the system.When you have finished whole staffs,turn on new unit to check its working system.Hope you good luck!

If you are not very sure about it,you can visit some related websites to find some useful information or ask someone who knows well for help.Everything will be solved only if you are sure to achieve it.

And there is a video that may help know better about aftermarket stereo,so you can have a watch at it before you begin replacement:

Installation guide for 2010-2014 Chevrolet Orlando radio tv bluetooth Ipod

Posted on April 9, 2015 by mutt

Before we talk about installation guide for 2010-2014 Chevrolet Orlando radio tv bluetooth Ipod,I think we should have a general idea about this new radio which has more advanced functions.Here is an image for it,head unit after installation,radio gps bluetooth mp3 of 2010-2014 Chevrolet Orlando:

head unit after installation,radio gps bluetooth mp3 of 2010-2014 Chevrolet Orlando

We can see that this car dvd dashboard is a little different from other ones for this stereo has two operations:one is touch screen which can be used with a touch screen pen,the other is push button system,you can operate this unit by both ways.But it doesn’t matter removing your original stereo only if your radio dashboard is alike with above one.

Thus the next question comes to how will us install gps radio for 2010-2014 Chevrolet Orlando,actually it is a normal work that can be fulfilled by ourselves,but on the condition that we have known correct installation guide and act according to it.And here gives you specific procedure of this action.

1.Use a panel removal tool,gently pry the upper vent housing panel from the dash

use a panel removal tool,gently pry the upper vent housing panel from the dash

2.Pry the shifter surround panel,on manual transmission vehicles,unclip and reposition the shifter

pry the shifter surround panel,on manual transmission vehicles,unclip and reposition the shifter

3.Remove 2 screws from the storage pocket,remove storage

remove 2 screws from the storage pocket

remove storage

4.Remove 4 screws from the accessorv control panel

remove this screw and the other corresponding one

remove this lower screw and the other corresponding one

5.Pull out on panel,this panel was very tough to remove,be patient and the clips will release let panel hang to side

pull out on panel

6.Remove 2 screws from the radio control panel, disconnect the radio control panel

remove 2 screws from the radio control panel

7.This is a really strange blue clip you must remove the blue clip completely before removing the real connector,and remove the other clip

remove the blue clip completely before removing the real connector

8.Remove 2 screws from the radio chassis,and 2 screws near the top of the stereo to release the screen

remove 2 csrews from the radio chassis

and 2 screws near the top of the stereo to release the screen

9.Remove screen by pulling out,remove behind clip

remove screen by pulling out

10.Remove 2 more screws on stereo

remove 2 more screws on stereo

11.Remove stereo and connectors

remove stereo and connectors

Removal process is over here,the nex job is to install a new Chevrolet Orlando radio which may be easier than above actions. What you need to do is to plug connectors of new unit to original one’s precisely,you can do read installation instructions carefully and you will find answers from it.After connecting all connectors,tidy them in order to avoid damage for cables and antennas,then install your new stereo into the car.

When you have done these things,you can turn on your radio and check whether it can work well.If it’s ok,then you can firm those screws which were removed before and mount storage,shifter and upper vent housing panel back to right places.Thus the whole procedure is achieved and you will enjoy a good journey in your car.

If you have some doubts on this dvd player,you may have a look at this video for help:

Attention:please keep everything that are removed well especially the screws for they are small but useful,for once use again.It can be very distraughted if you can’t find a necessary thing.

Page 1 of 212

Benz DVD Player

benz dvd player,Car Electronics

Monthly Archives: April 2015

2003-2010 VW Touareg radio stereo display replacement

Installation guide for 2013 Hyundai I30 bluetooth dvd aftermarket sat nav system

Upgrade steps for 2008 2009 2010 2011 Toyota Auris radio stereo sound system

How to mount 2013 Toyota RAV4 aftermarket navigation system

2002-2009 Mercedes E Class W211 E200 E220 E230 CD radio sound system removal

How to upgrade 2014 Jeep Grand Cherokee head unit audio system

How to install 2008 2009 2010 2011 Jeep Grand Cherokee aftermarket sat nav system

Installation guide for 2009-2012 OPEL Antara gps radio with touch screen auto A/V

2013 2014 2015 Ford F150 stereo audio system removal

Installation guide for 2010-2014 Chevrolet Orlando radio tv bluetooth Ipod

April 2015
M	T	W	T	F	S	S
« Mar				May »
		1	2	3	4	5
6	7	8	9	10	11	12
13	14	15	16	17	18	19
20	21	22	23	24	25	26
27	28	29	30