Here is autoradio after upgrade,head unit dvd gps aftermarket sat nav system of 2013 2014 2015 Ford F150.
We can find that there is a little difference between this one and others:first of all the exterior of it is a special shape while most other stereos are rectangles;It has both touch screen and button controls to operate it.So this unit is not a common radio but a practical one.In addition,this unit matches not only F150,but also F250 F350.Many people want to replace their car autoradios but they have no idea about 2013 2014 2015 Ford F150 stereo audio system removal,in that way you may get what you need from this article,which will show detailed operations about head unit removal for Ford F150.
About this aftermarket radio,you can get some introductions from visiting websites,for example:http://www.seicane.com/head-unit-car-stereo-sat-navi-multimedia-player-for-2013-ford-f150-with-gps-radio-dvd-bluetooth-3g-wifi-support-swc-3-zone-pop-c267 .
Before you start your upgrade,you may need to prepare some tools such as screwdriver,panel removal too and so on.
2013 2014 2015 Ford F150 head unit car stereo removal and installation:
1.Remove the rubber pad at the top of the radio trim panel
2.Remove the 2 screws exposed
3.Unclip and pull the side panels containing the a/c vents away from the radio trim panel.Please note that it is not necessary to remove the panels completely
4.Unclip and remove the radio trim panel
5.Unclip all molex plugs
6.Remove 4 screws to take out the factory radio
7.Remove stereo and unplug connectors
Now the original CD player is removed with the help of right instructions,you can make a comparison between your new bought stereo and the space you will install after you succeed removing primary radio.Why?You need to make sure that it can installed into your car,then you can continue things behind. To be honest,installing steps can be easier than removing Ford F150 stereo especially when you have done the latter.The most important thing maybe connecting the cables,interfaces between them,and you can carefully do it according to installation instructions.Next,make all removed objects back to firm the system.When you have finished whole staffs,turn on new unit to check its working system.Hope you good luck!
If you are not very sure about it,you can visit some related websites to find some useful information or ask someone who knows well for help.Everything will be solved only if you are sure to achieve it.
And there is a video that may help know better about aftermarket stereo,so you can have a watch at it before you begin replacement: