First show you a picture of Seicane 2010 Ford Transit Connect Radio after installation.
Today I’ll tell you how to install a new aftermarket radio on 2010 Ford Transit Connect. You may think there is no need to know how to install aftermarket 2010 Ford Transit Connect Radio for there will be someone that can help you finish this work. However, a lot of Ford drivers choose to install it by themselves, this is a real fact.
You can also do it if you reading corresponding articles or asking other people what the process is, these are all making comparisons for the installation work.
Before installation, you should to know whether the new aftermarket radio fits your car, here is a good aftermarket radio of Seicane for 2010 Ford Transit Connect I’d like to introduce to you:
This Ford Transit Connect Radio has intelligent android 4.4.4 operation system, high quality RK 3188 with 1.6 GHz Cortex A9 Quad-core CPU, and 7 inch HD 1024*600 Pixels multi touch screen with smooth operation high sensitivity.
You can watch HD 1080P movies with your family or friends on your car. When you come to a city you’ve never been,you can use the 3D navigation to find the right way.And you can surfing internet via 3G or WiFi when you are waiting for someone.
2010 Ford Transit Connect Radio installation
1.Pry down two small trim panels with a plastic tool, then set them aside.
2.Then remove a few screws with a Phillips screwdriver and pull out the top panel.
3.Pry this panel and loosen it.
4.Remove several screws under the trim panel with a screwdriver.
5.Then pull out the trim panel.
6.Remove four screws to remove the factory radio and unplug connectors behind it.
7.Gently make the trim panel out of dashboard after you have removed screws on it, and install new radio to right space
8.Firm screws and tight them beside the radio,make dashboard back coverd on it, whole procedure for it has been finished.
Above are all instructions of 2010 Ford Transit Connect Radio installation. And here are something you should notice during installation.
1.Please remember to unplug the negative battery cable before starting stereo removal.
2.Please finish your parking series include turn off all car series functions too.
3.Have a check for your radio include some related objects to car radio, and see whether everything is ok before your installation.