1,490 views

10 steps for 2010 Toyota Raze radio gps car stereo replacement

There’s no doubt that confirming car information like mode,size and years is very esay.but if is’s about 10 steps for 2010 Toyota Raze radio gps car stereo replacement? Maybe very few people knows.Here is a picture of car stereo radio of 2010 Toyota Raze.

dvd player of 2010 Toyota Raze

dvd player of 2010 Toyota Raze

Before you replace your car’s CD player,you need to make sure that the instructions are exactly right.First of all,you must know if this player can be installed in your car.After that, how to upgrade the head unit of 2010 Toyota Raze become the real issue that we should solve.   If you would like to install the navigation system more precise and safer, here are some tips about the installation and usage of the unit:

Please use the touch screen pen to operation unit, do not use other sharp objects, if not it will damage the screen;Don’t do self-service,maintenance or install the unit pleasde,in case of the power is on;If the person haven’t received the electronic equipment or vehicle installation training or lack of experience, don’t install or repair the unit because it is very dangerous. Installation guide will be showed in the following part:

1.Remove negative terminal of battery before starting install

2.Use a panel removal tool,unclip side panels from lower center console(beside shifter)

use a panel removal tool,unclip side panels from lower center console

use a panel removal tool,unclip side panels from lower center console

3.Use a small flat blade screwdriver remove the plastic piece that’s contains the shifter override

use a small flat blade screwdriver remove the plastic piece that's contains the shifter override

use a small flat blade screwdriver remove the plastic piece that’s contains the shifter override

4.Insert key into override move in gear and remove shift benzal piece

insert key into override move in gear and remove shift benzal piece

insert key into override move in gear and remove shift benzal piece

4.Remove 2 screws from sides of aux input panel unplug connectors

remove 2 screws from sides of aux input panel unplug connectors

remove 2 screws from sides of aux input panel unplug connectors

5.Take out the below small dashboard

take out the below small dashboard

take out the below small dashboard

6.Use a panel removal tool,unclip side panels from radio

use a panel removal tool,unclip side panels from radio

use a panel removal tool,unclip side panels from radio

7.Remove air vent and unplug hazard switch gently

remove air vent

remove air vent

gently unplug hazard switch

gently unplug hazard switch

8.10mm hex head screws from stereo like the image show

10mm hex head screws from stereo

10mm hex head screws from stereo

9.Unclip stereo,unplug connectors and remove

unclip stereo,unplug connectors and remove

unclip stereo,unplug connectors and remove

10.Install the dvd player in it and connect all the cables correctly,firm all the screws to original positions,then the installation work has finished.If you want to know more about how functions operate,visit the following website: http://www.seicane.com/8-inch-2010-toyota-raze-autoradio-gps-head-unit-3g-wifi-cd-dvd-player-dvr-bluetooth-music-tv-tuner-aux-steering-wheel-control-ipod-iphone-backup-camera-mp3-pop-c084 ,it may provide you a lot of information.

After seeing 10 steps of installment for the car head unit, I’m sure that most of us have some idea about how to mount the Toyota Raze gps radio  and some situations that we need to pay attention to.

In fact it won’t be a dangerous work as long as you read the removal guide patiently and act according to the instructions of  installment process. New head unit of the car has a lot of entertaining functions,it will bring you much pleasure.But please remember not make the movies distruct your attentions on the road,yet let the nav system instead of your head,because it just bring us convrenience.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>